User's Manual

58*58mm
双面印刷
*红字和红边不印刷
Model: LS21001

- 1 -
Water Leak Sensor
Wasserlecksensor
User Manual
- 2 - - 3 -
Install the detector in areas where there is a concern about
possible water leaks, such as bathrooms, basements, water
heaters, clogged sewer pipes, old drainage pipes, or in other
areas of your home that are prone to leaking. You can receive
an instant alert.
Do not install it in an area where it can come in contact with rain,
cooking fume and steam from a kitchen range hood.
Never immerse the detector in water.
Cautions
- 4 -
Specification
Protocol Zigbee 3.0
Baery 
Decibel 
Connection Range
40M(Indoor open space,
with a clear line of sight)
IP Rating 
Stand-by Time 3 years
Operating Temperature 0°C~40°C(32°F~104°F)
Quick Start Guide
Schnellstartanleitung
- 6 - - 7 -


.
Aention
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation


accepter tout brouillage radioélectrique subi, même si le

IC NOTICE TO CANADIAN USERS
- 8 -
- 10 -
My Home


2. Erstellen Sie ein Konto und melden Sie sich an.



www.linkind.com oder wenden Sie sich an unseren Kundendienst.
- 11 - - 12 - - 14 - - 15 -
SPRING SUNSHINE TECHNOLOGY CO.,LIMITED







Made in China
Contact Us
- 16 -- 13 -- 9 -
- 5 -
Screws



Screws


and gets in contact with both the probes on the detector.

sounds to ensure the detector is working properly.
Do not stack any items on the surface of the detector, as this may

Clean the surface with soft cloth regularly.

on your own.
Cautions





können sofort benachrichtigt werden.


kommen kann.













Installationshinweis

My Home
2. Create an account and sign in.
Water Leak Sensor.


www.linkind.com or contact our support team.

detector where there is a concern for a potential water leakage. It
will be ready for use.


seconds, then the LED indicator(signal light) will start blinking
quickly.

Product Usage

search for a new enabled Zigbee network.


light) blinks once per second and sensor starts searching an
enabled Zigbee network.

light will stay on for 10 seconds.
C. If no available networks were found within 3 minutes, the LED





water leak after 10 minutes, the detector will trigger the alarm








Dispose of the device separately from household

recycling protects people and the environment




interference received, including interference that may cause
undesired operation.

expressly approved by the party responsible for compliance could




protection against harmful interference in a residential
installation.

energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio

will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which

encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.

that to which the receiver is connected.

DE
003

003 du Canada).

the essential requirements and other relevant provisions of

Produktprofil
(Entfernen Sie die Schrauben und die hintere

Spezifikation
Protokoll 
Baerie 
Dezibel 
Anschlussreichweite
40M (In direkter Reichweite der


IP Klasse 
Standby Zeit 
Operating Temperature 0°C~40°C(32°F~104°F)






Sekunden lang gedrückt, dann beginnt die LED (Signallampe)



einmal pro Sekunde, um nach einem neuen aktivierten




Sekunde und der Sensor beginnt mit der Suche in einem


blinken und das Licht bleibt 10 Sekunden lang an.


Produktnutzung











Die Stromversorgung ist ausgeschaltet


EN
Product Profile

Summer Schallloch
Schraube



Schraube

Summary of content (1 pages)