Conference Mate © 2015 Spracht. All rights reserved. Spracht, the Spracht logo, and Conference Mate are trademarks and registered trademarks of Spracht. All other trademarks are property of their respective owners. Visit our website at www.spracht.com.
PACKAGE CONTENTS ➊ Conference Mate™ Portable NFC Enabled Bluetooth® Speakerphone ➋ USB Cable ➌ AC Adapter ➍ User Guide ➎ Registration ➊ ➋ Conference Mate ➌ TABLE OF CONTENTS Introduction Conference Mate™ Design Precautions Care and maintenance Charging the battery Powering ON/OFF Pairing Pairing via NFC (Near Field Communication) Answering/Rejecting/Ending a call Adjusting the volume/Muting Music playback Limited warranty policy FCC statements 1 2 3 4 5 5 6 7 7–8 8 8–10 10–11 12–13
SPECIFICATION Conference Mate™ Part Numbers: MCP-3020, Marble White; MCP-3022, Obsidian Black Electrical/Audio Specifications • Bluetooth® range: 33' (10m) • Playback time Talk Time/Music Playback: up to 7 hours typical • Audio input jack: 3.5mm • Loudspeaker output power: 2W • Audio Bandwidth: Voice, 8Khz sampling; Music, 44KHz sampling • 700 mVpp (at 10kΩ) • Certifications: FCC, CE, RoHS All information is believed to be reliable, however specifications are subject to change without notice.
➍ ➎ 2 Conference Mate ➏ ➐ ➋ x – ➊ + ➊ Volume Down ➋ Volume Up ➌ Microphone Mute ➍ Answer Call ➎ On/Off ➏ LED ➐ USB Port ➑ 3.5mm Jack ➌ ➑ PRECAUTIONS • Please read the operating instructions and safety precautions carefully before use. • Do not throw the device into an open fire. • Please use only the accessories that came with Conference Mate™. This will allow Conference Mate™ to have the longest possible life. • The are no user replaceable parts inside.
Note: Improper use will invalidate the guarantee! In some countries there may be restrictions to the use of Bluetooth® devices. Check the regulations in your area. CARE AND MAINTENANCE Read the following recommendations before using Conference Mate™ and you can enjoy your new product for many years. 1. Keep it dry and don’t take it to damp places to avoid affecting the unit’s internal circuitry. 2. Keep the product away from direct sunlight and extreme heat.
PAIRING 1. Turn the ON/OFF switch to the right. Conference Mate™ will enter pairing mode, and the blue and red LEDs on the unit will flash alternately. 2. Activate Bluetooth® on your mobile phone (or other Bluetooth® enabled device) and search for Bluetooth® devices (if in doubt please refer to your smartphone’s user manual for details on activating Bluetooth®). 3. Follow your smartphone’s instruction guide to connect to a Bluetooth® device.
ENDING A CALL Press Answer/End Call to end the call or end the call via your phone in the normal way. ADJUSTING THE VOLUME Press + or - to the desired volume level. THE MUTE FUNCTION During a call, you can press to mute Conference Mate’s Microphone, and the Mic Mute light will be on while in muting mode. Press it again to cancel Mic Mute. MUSIC PLAYBACK Via Bluetooth® pairing: Connecting to a Bluetooth® A2DP cell phone or a Bluetooth® device.
3. If you plug in a music player to Conference Mate’s input jack while it is paired with a Bluetooth® device, the Bluetooth® device will disconnect from Conference Mate™. When you unplug the 3.5mm audio cable, Conference Mate™ will reconnect to the last paired Bluetooth® device. Download the FREE Bongiovi DPS App to improve the quality of your compressed audio playback, for an even fuller and deeper sound. Available now for iOS; check the website for Android.
FEDERAL COMMUNICATION COMMISSION STATEMENT Interference Statement This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the following two conditions: 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation.