User's Manual Part 1

SPORTident-Station BS11-BS blue
April 2016
Identification at check points in outdoor sport disciplines like trail, biking and skiing is slightly
different than in orienteering. In general passing speed is higher and control points are more line
elements than filigree objects. The BS11-BS is special adapted for these applications by enabling
identification over the air. By using the BS11-BS the SPORTident Active Card SIAC1 can register
the intermediate and start/finish times contactless in a range of up to 1.80 meters.
The station is part of SPORTident AIR+ system configuration.
BS11-BS blue
USB connector
BS11-BS blue
Beacon Small
The SPORTident Station BS11-BS comes in a housing at the size of the SI-station BSx7. The
station works battery powered standalone but can be controlled and also be charged by USB
interface.
Key features are:
● The SPORTident station BS11-BS blue is compatible with the SPORTident system parts
and can be configured by software SI-Config+.
● The BS11-BS blue features stronger coupling field strength compared to stations BSF7/8.
● Compared to stations BSF7/8 the BS11-BS blue features additional beacon working
modes.
Beacon modes (BC-START, BC-CONTROL, BC-FINISH) for identification over-the-air
The station transmits a data record comprising the internal real time, the code number, and the
operating mode periodically. This record is caught by the SI-Card.
The working distance is up to1.80 meters. There are two time keeping modes “punching” and
“timing” to best serve in different sport applications
The number of SIAC's which can be triggered simultaneously is unlimited.
The station does not directly receive signals from the SIAC. There is a second transmission
channel by radio.
Please note: After the defined working time, the station turns OFF automatically. There is
no prolongation depending on triggered SI-Cards.
SPORTident GmbH • www.sportident.com • [e-mail] • Arnstadt • Germany