Installation Instructions

Remote Lighter function description

1）The appearance of this remote lighter is the same as the original ZIPPO

lighter, and it has the normal ignition function as the ZIPPO lighter. The

difference is that this remote lighter is equipped with an automatic ignition

device which can be operated by a remote control. So, the lighter itself can

be used alone or used in conjunction with the remote control.

2) Automatic ignition function: the ignition device is installed in the metal

case of the lighter. There is a round hole on the metal case. When putting

the ignition device into the metal case of the lighter, the ignition button just

matches the position of the round hole. Then put it into the leather case,

you won't notice any difference in appearance. In a trick performance, if

you press the ignition button shortly, it will delay the ignition for 5 seconds.

If you long press the ignition button (3 seconds), it will delay the ignition

for 10 seconds.

3) Ignition Cancellation in time: during the delayed ignition process, the

operator can cancel the ignition instruction in time if he wants. After the

ignition button is short-pressed or long-pressed, the ignition will be delayed

for 5 seconds or 10 seconds. If the operator does not want to ignite while

waiting, he can press the ignition button again briefly, and the previous

ignition function can be cancelled in time. If he wants to ignite again, he

has to press the ignition button again.

PAGE 1
Remote Lighter function description 1）The appearance of this remote lighter is the same as the original ZIPPO lighter, and it has the normal ignition function as the ZIPPO lighter. The difference is that this remote lighter is equipped with an automatic ignition device which can be operated by a remote control. So, the lighter itself can be used alone or used in conjunction with the remote control. 2) Automatic ignition function: the ignition device is installed in the metal case of the lighter.
PAGE 2
4) Charging and LED light indication: this device has a built-in rechargeable lithium battery, and is also equipped with an USB cable and an adaptor charger for charging. In addition, the device has an LED light to indicate the status of power-on, power-off, low battery power, charging/fully charged, or pairing. 5) About remote control function The remote control is designed to activate the lighter. There are 4 rubber buttons printed with INS, PAIR, 6S, and 12S on the remote.
PAGE 3
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the receiving antenna.