JKS3 GPS Tracking Device
Table of Contents 1. GETTING STARTED ............................................................................................... 7 1.1 UNPACKING INFORMATION ......................................................................................7 1.2 INTRODUCTION......................................................................................................7 2. PORTS AND LED INDICATORS............................................................................... 8 2.1 PORTS ........................
Declaration of Conformance Manufacturer: Name: Wistron NeWeb Corporation Address: 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.
Safety Instruction Only authorized service providers shall replace the battery in this device. Do not disassemble, open, crush, bend, deform, puncture, or shred. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazards.
Regulatory Statement 4
FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Industry Canada statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
1. Getting Started 1.1 Unpacking Information Included in the package are the following items: JKS3 GPS Tracking Device Cable x1 1.2 Introduction The JKS3 is a self-contained tracking device that combines GPS location with LTE Cat. M1 network connectivity. The device responds to user or server requests. Data reports contain all location data and the system status. The device comes pre-configured from the factory, ready to use.
2. Ports and LED Indicators 2.
2.
3. Installation The image below shows how the JKS3 tracking device is installed.
4. Specifications Hardware & software • • • WAN module: IMQ3 – LTE CATM1 (B4/13/25/26) – GPS/GLONASS/aGPS USIM 3FF Microcontroller – STM32 F030 – ADC/UART/SPI/I2C/GPIO – 5 power mode control Backup battery • Li-ion battery – Spec: 170 mAh/3.7 V – Max discharge current: 5 C – Operation temperature range: –10°C to +60°C Buzzer • • • • Electro-magnetic buzzer Operating voltage: 3 V to 6.5 V Resonant frequency: 2700 ± 300 Hz Sound output at 10 cm: ≥ 83 dBm Mechanical • • Dimensions: 92.