User's Manual

F303W
Po
rt
Specica
tions
7. For fast charging, use a QC 2.0 or QC 3.0 adapter of 9V 1.67A.
with mag
net strips or chips (IDs, credit cards, etc.)
in such
with y
our purchase?
•
I
nput: DC 5V 2A or 9V 1.67A
• Radiated power: 5W, 9W
• Charge eciency: ≥70%
• Transmission distance: 0.27 inch (Max)
• Size: 7.55 × 3.3 × 0.74 inches
• Product Weight: 4.23 ounce
• Frequency: 111~205KHz
O
nce all parts are connected, the lights will appear
in the order below:
1. BL
UE LED blinks once
2. RED LED blinks once
3. BOTH blink once
4. BOTH OFF: Standby Mode
QC2.0 or QC3.0
(F
ast Charger, 9V 1.67A)
LED Blue
, Red
ON
LED Blue, Red
ON
Adapter
5V 2A Adapater
During charge Fully charged
LED Blue light
(M
essage: Wireless charging)
LED R
ed light
(M
essage: Fast Wireless charging)
LED Ligh
t Status
Char
ging will begin as soon as the phone is placed on
the stand and turn LED lights to reect its status as shown
in the table below.
W
e hope you enjoy wireless charging with your new F303W
Fast Wireless Charger! Please read this manual before using
the product and use it for future reference.
Ho
w to Connect to an AC Adapter
Charging Mode
R
emove
protective lm before use.
T
he LED light will indicate when it is on Standby Mode.
U
sing the F303W Fast Wireless Charger
F
AST
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.