Installation Manual

ManualsBrandsSpiderCloud Wireless ManualsElectronicsSpiderCloud Radio Node

SpiderCloud Radio Node - SCRN-320 Hardware Installation Guide

Attach the mount bracket to the radio node as shown in Figure 11:

Figure 11 Radio Node Slides into Mount Bracket

Installing the Radio Node (Method 1)

Use this method with the quarter-inch bracket when routing the Ethernet cable through an opening where

the bracket will be mounted.

To route the cable directly and mount the radio node

Step 1 Cut a hole in the ceiling or wall to route the Ethernet cable through. Align the hole with the

bracket Ethernet cable entry hole.

Step 2 Route the Ethernet cable through the rectangular hole in the mounting bracket.

Figure 12 Mount Bracket with Direct Cable Routing

Bracket

Keyholes

Ethernet Cable

Entry Hole

DRAFT

SpiderCloud Wireless, Inc. Proprietary and Confidential

Summary of content (9 pages)

PAGE 1
SpiderCloud Radio Node - SCRN-320 Hardware Installation Guide Attach the mount bracket to the radio node as shown in Figure 11: T Bracket Keyholes Figure 11 Radio Node Slides into Mount Bracket AF Installing the Radio Node (Method 1) Use this method with the quarter-inch bracket when routing the Ethernet cable through an opening where the bracket will be mounted. To route the cable directly and mount the radio node D R Step 1 Cut a hole in the ceiling or wall to route the Ethernet cable through.
PAGE 2
SpiderCloud Radio Node - SCRN-320 Hardware Installation Guide Step 3 With two user-provided screws, attach the mount bracket assembly to a wall or ceiling. The screw holes are sized for an M4 (#10) or larger screw. Ensure the screws have a snug fit onto the studs, sheetrock, anchor, or other material you are bolting onto and that you match the screw head with the appropriate cutout hole size on the bracket. If needed, use a flat washer between the bracket and screw head to ensure a secure fastening.
PAGE 3
SpiderCloud Radio Node - SCRN-320 Hardware Installation Guide T If needed, use a flat washer between the bracket and screw head to ensure a secure fastening. Figure 14 shows the 1.25-inch mount bracket. Figure 14 1.25-Inch Mount Bracket D R AF Step 2 Insert the RJ-45 connector through the rectangular bracket opening into the Ethernet port as shown in Figure 15: Figure 15 Route and Terminate the Cable Step 3 Insert the radio node into the mount bracket. 18 SpiderCloud Wireless, Inc.
PAGE 4
SpiderCloud Radio Node - SCRN-320 Hardware Installation Guide Completing the Installation Step 1 Attach a padlock or cable tie wrap into the provided slot to secure the unit to the mount bracket. Figure 16 Padlock and Lock Holes The lock in the above figure is shown schematically. The orientation is for illustration purposes (not accurate) since the bracket is typically wall or ceiling mounted. T Note AF Step 2 The radio node boots up and attempts to connect to the services node.
PAGE 5
SpiderCloud Radio Node - SCRN-320 Hardware Installation Guide Boot Sequence and Services Node Communication On initial boot, the radio node performs the following boot sequence. When finished, all devices are reachable.
PAGE 6
SpiderCloud Radio Node - SCRN-320 Hardware Installation Guide Radio Node LED Boot Sequence The radio node state machine is sequential and progresses in the following order: State 0 -> State 1 -> State 2 -> State 3 -> State 4 -> State 5 A normal boot sequence transitions through all these states sequentially and the LED state transitions accordingly. If the radio node fails to transition to the next state, the system restarts the boot sequence, starting with State 0.
PAGE 7
SpiderCloud Radio Node - SCRN-320 Hardware Installation Guide Table 6: Radio Node LED Boot Sequence (continued) State LED Color 4. Operating System Booting Flashing Green Description Possible Failures and Actions The radio node loads the operating system and starts the default platform applications. The radio node moves to the next state (State 5) when it establishes connectivity with the service node. 5. Running Solid Green The operating system is running.
PAGE 8
SpiderCloud Radio Node - SCRN-320 Hardware Installation Guide To disable the LED display Step 1 From the Configuration Mode, issue the set System RadioNode LED DefaultMode Dark command to disable the LED display: set System RadioNode LED DefaultMode Dark Step 2 Issue the show System RadioNode LED command to verify the configuration: show System RadioNode LED DefaultMode Dark; To re-enable the LED display Step 1 From the Configuration Mode, issue the set System RadioNode LED DefaultMode Standard command to
PAGE 9
SpiderCloud Radio Node - SCRN-320 Hardware Installation Guide The Performance Measurements for LTE Small-Cell E-RANs provides a reference guide to Key Performance Indicators (KPI) that monitor the health and state of an LTE E-RAN system. • The E-RAN Troubleshooting Guide provides information about diagnosing and correcting problems with installing, provisioning, administering, and maintaining SpiderCloud equipment and services.