User's Manual Part 2

ManualsBrandsSpiderCloud Wireless ManualsElectronicsSpiderCloud Radio Node

SpiderCloud Radio Node - SCRN-220 Hardware Installation Guide

Step 3 With two user-provided screws, attach the mount bracket assembly to a wall or ceiling. The

screw holes are sized for an M4 (#10) or larger screw. Ensure the screws have a snug fit

onto the studs, sheetrock, anchor, or other material you are bolting onto and that you

match the screw head with the appropriate cutout hole size on the bracket.

If needed, use a flat washer between the bracket and screw head to ensure a secure

fastening.

Step 4 Insert the RJ-45 connector into the Ethernet port as shown in Figure 13:

Figure 13 Route and Terminate the Cable

Step 5 Insert the radio node into the mount bracket.

Step 6 Push as much cable back through the wall or ceiling as possible. The mount bracket

assembly has room for some cable slack.

Installing the Radio Node (Method 2)

Use this method with the 1.25 inch bracket when routing an exposed Ethernet cable directly to the radio

node.

To route the cable openly and mount the radio node

Step 1 With two user-provided screws, attach the mount bracket assembly to a wall or ceiling. The

screw holes are sized for an M4 (#10) or larger screw. Ensure the screws have a snug fit

onto the studs, sheetrock, anchor, or other material you are bolting onto and that you

match the screw head with the appropriate cutout hole size on the bracket.

SpiderCloud Wireless, Inc. Proprietary and Confidential

Summary of content (12 pages)

PAGE 1
SpiderCloud Radio Node - SCRN-220 Hardware Installation Guide Step 3 With two user-provided screws, attach the mount bracket assembly to a wall or ceiling. The screw holes are sized for an M4 (#10) or larger screw. Ensure the screws have a snug fit onto the studs, sheetrock, anchor, or other material you are bolting onto and that you match the screw head with the appropriate cutout hole size on the bracket. If needed, use a flat washer between the bracket and screw head to ensure a secure fastening.
PAGE 2
SpiderCloud Radio Node - SCRN-220 Hardware Installation Guide If needed, use a flat washer between the bracket and screw head to ensure a secure fastening. Figure 14 shows the 1.25-inch mount bracket. Figure 14 1.25-Inch Mount Bracket Step 2 Insert the RJ-45 connector through the rectangular bracket opening into the Ethernet port as shown in Figure 15: Figure 15 Route and Terminate the Cable Step 3 Insert the radio node into the mount bracket. 18 SpiderCloud Wireless, Inc.
PAGE 3
SpiderCloud Radio Node - SCRN-220 Hardware Installation Guide Completing the Installation Step 1 Attach a padlock or cable tie wrap into the provided slot to secure the unit to the mount bracket. Figure 16 Padlock and Lock Holes The lock in the above figure is shown schematically. The orientation is for illustration purposes (not accurate) since the bracket is typically wall or ceiling mounted. Note Step 2 The radio node boots up and attempts to connect to the services node.
PAGE 4
SpiderCloud Radio Node - SCRN-220 Hardware Installation Guide Boot Sequence and Services Node Communication On initial boot, the radio node performs the following boot sequence. When finished, all devices are reachable.
PAGE 5
SpiderCloud Radio Node - SCRN-220 Hardware Installation Guide Radio Node LED Boot Sequence The radio node state machine is sequential and progresses in the following order: State 0 -> State 1 -> State 2 -> State 3 -> State 4 -> State 5 A normal boot sequence transitions through all these states sequentially and the LED state transitions accordingly. If the radio node fails to transition to the next state, the system restarts the boot sequence, starting with State 0.
PAGE 6
SpiderCloud Radio Node - SCRN-220 Hardware Installation Guide Table 6: Radio Node LED Boot Sequence (continued) State LED Color 4. Operating System Booting Flashing Green Description Possible Failures and Actions The radio node loads the operating system and starts the default platform applications. The radio node moves to the next state (State 5) when it establishes connectivity with the service node. 5. Running Solid Green The operating system is running.
PAGE 7
SpiderCloud Radio Node - SCRN-220 Hardware Installation Guide * Refer to the SpiderCloud OS (SCOS) Administrator Guide for information about the locate radio node and follow IMSI features.
PAGE 8
SpiderCloud Radio Node - SCRN-220 Hardware Installation Guide • The Performance Measurements for Dual-Mode Small-Cell E-RANs provides a reference guide to UMTS and LTE Key Performance Indicators (KPI) that monitor the health and state of the ERAN system. • The Performance Measurements for LTE Small-Cell E-RANs provides a reference guide to Key Performance Indicators (KPI) that monitor the health and state of an LTE E-RAN system.
PAGE 9
SpiderCloud Radio Node - SCRN-220 Hardware Installation Guide Appendix A: LTE Antenna Patterns LTE Band 2 Frequency: 1960 MHz. Peak Gain: 3.21 Dbi. 0º Up 90º Front Frequency: 1960 MHz. Peak Gain: 1.50 Dbi. 0º Up 90º SpiderCloud Wireless, Inc.
PAGE 10
SpiderCloud Radio Node - SCRN-220 Hardware Installation Guide LTE Band 4 Frequency: 2145 MHz. Peak Gain: 4.10 Dbi. 0º Up 90º Front Frequency: 2145 MHz. Peak Gain: 2.63 Dbi. 0º Up 26 90º SpiderCloud Wireless, Inc.
PAGE 11
SpiderCloud Radio Node - SCRN-220 Hardware Installation Guide LTE Band 13 0º Up 90º Front 0º Up 90º SpiderCloud Wireless, Inc.
PAGE 12
SpiderCloud Radio Node - SCRN-220 Hardware Installation Guide 28 SpiderCloud Wireless, Inc.