SmartCloud® Radio Node - SCRN 200 Hardware Installation Guide Part number: DOC-RN-HW-05 Published: December 2012
© 2012 SpiderCloud Wireless, Inc. SpiderCloud and SmartCloud are registered trademarks of SpiderCloud Wireless, Inc. All Rights Reserved. FCC Statements Warning: In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, the SCRN 200 must have a minimum distance of 20 cm from the body during normal operation. Changes or modifications not expressly approved by SpiderCloud Wireless engineering voids the user’s authority to operate the equipment.
SmartCloud Radio Node - SCRN 200 Hardware Installation Guide Table of Contents System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Services Provided . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Radio Node System Isometric Top View and Bottom View. . . . . . . . . . . . . . . . . . . . . . . . . . System Specifications. . . . . . . . . . . . . . . . . . . .
Contents 4 SpiderCloud Wireless, Inc.
SmartCloud Radio Node - SCRN 200 Hardware Installation Guide System Overview The SmartCloud® Radio Node 200 (SCRN 200) is a low-cost, low-power (100mW) base station designed for indoor use. The radio node is 3GPP compliant, supporting Universal Mobile Telecommunications System (UMTS) Release 6 software. The radio node provides enterprises with dedicated coverage and capacity for UMTS services. It is easy to install and connects to the existing enterprise LAN using standard Ethernet cabling.
SmartCloud Radio Node - SCRN 200 Hardware Installation Guide Radio Node System Isometric Top View and Bottom View The following diagrams display an isometric top and bottom views of the radio node: Figure 2 Radio Node Top View Figure 3 Radio Node Bottom View with Pedestal Base 6 SpiderCloud Wireless, Inc.
SmartCloud Radio Node - SCRN 200 Hardware Installation Guide System Specifications Following are the system specifications for the radio node frequency bands of operation, system size, power, environmental requirements, and compliance: Frequency Bands of Operation • UMTS Bands — Band I: Receiver: 1920-1980 MHz, Transmitter: 2110-2170 MHz. GSM monitor at 925-960 MHz, 1805-1880 MHz — Band II: Receiver: 1850-1910 MHz, Transmitter: 1930-1990 MHz.
SmartCloud Radio Node - SCRN 200 Hardware Installation Guide Compliance • ETSI — EN 301 489-1 — EN 301 489-23 — EN 301 908-1 — EN 301 908-3 — EN 50385 — EN 60950-1 (safety) • IEEE 802.3at PoE+ • FCC — FCC Part 15 Class A — FCC Part 24 — FCC Part 27 • CE Marking • RoHS (Directive 2002/95/EC on RoHS) • R&TTE (Directive 1999/5/EC on R&TTE) • CB certification as per IEC 60950-1:2011 Ports and LEDs The radio node has one top-panel LED to indicate power and status.
SmartCloud Radio Node - SCRN 200 Hardware Installation Guide The radio node has one 10/100 Ethernet port that supports a Category 5 (CAT-5) cable with an RJ-45 connector. Figure 4 shows the 10/100 port. There are two LEDs on the connector: • Link: Steady green state indicates a normal Layer 2 link connection has been established. • Activity: Yellow blinking indicates data activity.
SmartCloud Radio Node - SCRN 200 Hardware Installation Guide Figure 5 shows the valid radio node cabling/powering options: SCSN 8000 PoE Switch or PoE Injector PoE Switch Out PoE Injector SCSN 8000 In Non PoE Switch Figure 5 Valid Radio Node Cabling/Powering Options SpiderCloud recommends the third-party Phihong POE36U-1AT single-port PoE+ injector. Use this injector only when a PoE+ Ethernet switch is not available.
SmartCloud Radio Node - SCRN 200 Hardware Installation Guide Select the Radio Node Location Select a location for the radio node. The unit can be installed in a wide range of locations including walls, ceilings, and plenum spaces. Follow the installation guidelines for choosing appropriate mounting locations for the unit. When mounting a radio node vertically, align the fins vertically for superior cooling.
SmartCloud Radio Node - SCRN 200 Hardware Installation Guide Installation and Mount Bracket Assembly The radio node has a pedestal base that slides into a long “U” shaped bracket for ceiling or wall mounting. SpiderCloud pre-bolts the pedestal base onto the extrusion plate on the radio node.
SmartCloud Radio Node - SCRN 200 Hardware Installation Guide To install the radio node: Step 1 With two user-provided screws, attach the mount bracket assembly to a wall or ceiling. The screw holes are sized for an M4 (#10) screw. Ensure the screws have a snug fit onto the studs, sheetrock, anchor, or other material you are bolting to: Figure 9 Attach the Mount Bracket Step 2 Route the Ethernet cable through the pedestal base cable opening and through the cable guards.
SmartCloud Radio Node - SCRN 200 Hardware Installation Guide Step 3 Slide the pedestal base of the radio node into the groove opening in the mount bracket.
SmartCloud Radio Node - SCRN 200 Hardware Installation Guide The lock in the above figure is shown schematically. The orientation is for illustration purposes (not accurate) since the bracket is wall or ceiling mounted. Note Step 5 The radio node boots up and attempts to connect to the services node. See Boot Sequence and Services Node Communication on page 15 for details.
SmartCloud Radio Node - SCRN 200 Hardware Installation Guide Sequence description: 1. When the radio node is powered on, the device sends a DHCP Request to the network DHCP server to get IP information. 2. The DHCP server is configured to use vendor Option 43. The server responds with the IP addresses of the radio node and the services node (the master of the radio node). The following example shows a sample configuration from a DHCP server, where 10.1.30.
Index Index A M activity LED 9 altitude range 7 antennas 9 mount bracket 12 B operating humidity range 7 operating temperature range 7 boot sequence 15 bottom view 6 C cabling guidelines 12 CB certification 8 CE marking 8 compliance 8 D depth 7 detaching 15 DHCP request 16 E EIRP compliance 7 environmental requirements 7 F FCC compliance 8 frequency bands of operation 7 O P pedestal base 12 PoE+ 9 power 7 R R&TTE compliance 8 related documentation 16 relative humidity range 7 RoHS compliance 8
Index 18 SpiderCloud Wireless, Inc.
