Kodierstation ES110 917.42.080 732.29.127 Encoding Station ES110 Deutsch (Betriebsanleitung) .....................................................................................2 HDE 04/2016 ZN 6.160.001.90b English (Operating manual) ...................................................................................
English (Operating manual) Table of contents 1. Information for instructions .................................................................. 21 1.1 Information for the operating instructions ............................................ 21 2. Overview ............................................................................................. 21 2.1 ES110 Brief description ...................................................................... 21 3. Associated documents ............................
1. Information for instructions 1.1 Information for the operating instructions These instructions make it possible to safely install and operate the ES110 encoding station as component of an access control system. The instructions are a constituent of the system, and must be kept in close proximity to the system in a location where they are accessible to the personnel at all times. The personnel must have carefully read and understood these instructions before starting any work.
The following transponder media can be encoded or read: ISO 14443 (e.g. Mifare Classic) and ISO 15693 (e.g. Tag-it ISO, iCode). 3. Associated documents As well as these assembly and mounting instructions, the following document is valid for the access control system: • Dialock terminal operating instructions • Dialock 2.0 user manual 4. Safety 4.1 Safety instructions and symbols in this document The safety instructions in this docuemt follow a uniform concept.
4.3 Intended use The ES110 is solely intended to be used with Dialock access control systems. The indented use also includes adherence to all of the specifications in these instructions. Any other type of use is considered as a misuse of the system. WARNING Danger in the event of misuse! Misuse of the reader and the controller can lead to hazardous situations. • Never install the ES110 in potentially explosive areas.
5. Description ES110 5.1 Scope of delivery A B C D E User manual B Cat 5 Patch cable, 2 m C Encoding station ES110 D Power supply PS 6 E Adaptors, amongst others for USA, Latin America, Great Britain, Australia HDE 04/2016 A 732.29.127 Fig.
5.2 Overview and connector locations D C B E 732.29.127 A Fig.: ES 110 functional units A Power supply B RJ 45 Socket C RFID Interface D LC-Display E USB Interface 5.3 Functional units Power supply (A) Power supply: 5V DC. RJ45 connector (B) Ethernet interface for data communication with AC server, connected via RJ45 connector. RFID interface (C) HDE 04/2016 RFID interface area below the display for the programing of transponders resting there.
USB interface (E) USB interface for manufacturing purposes, not to be used for operation. Web-Interface Web interface for the configuration of the ES110 Piezzo buzzer Piezzo buzzer supporting the operator guidance. 6. ES 110 Set up 6.1 Power supply NOTE Device damages through wrong installation! The ES110 can be damaged through wrong installation. • The installation of the ES 110 in a local network as well as the configuration of the ES110 must only be carried out by a trained Dialock technician.
Power supply over PoE „Power over Ethernet“ 10/100 Mbps Data+ Power C Power 10/100 Mbps Dat a PoE Splitter B A ES110 Fig.: Power supply ES110 „Power over Ethernet“ 732.29.127 » Connect ES110 to PoE splitter with Cat 5 cable (A) » Connect power cable to ES110 and PoE splitter (B) » Connect PoE splitter to local network (C). (See 6.2 Connecting to the local network) 6.
1 2 3 4 5 6 Fig.: Behaviour of the ES110 after switching on The duration of the „Loading“ sequence depends on current network conditions. For the initial parametrisation of the ES110 through a PC in the same network the factory-set IP address 192.168.121.206 is entered in the browser window. The connection with the ES110 is established and a log-in window appears. The default user name is ES110, the password is config. 732.29.127 Setting the IP adress HDE 04/2016 Fig.
After data entry is confirmed by clicking the Login button the page Device Informations showing detailled Device Iinformations and the Configuration menue appears. Fig.: Device Informations 732.29.127 The menue item Network has to be selected and the page Network opens with the factory set IP address. HDE 04/2016 Fig.
Now the new IP address is either entered statically, or the address setting can occur dynamically by activating DHCP: Fig.: IP adress setting/Activating DHCP With Apply Changes data entries are applied. 6.3 Firmware Update 732.29.127 As soon as the function Firmware Update has been selected the page Firmware Update takes place. With the function Browse the firmware file, which must be stored on the PC (e.g. after download from www.DIALOCK SUPPORT.de) can be uploaded to the ES110 with Update.
6.4 Changing password The factory-set password should immediately be replaced by an own, individual password: Fig.: Changing password 6.5 Checking the communication and other ES110 functions The communication check is initiated by calling the function in the submenu Troubleshooting. Device Informations 732.29.127 In this window the current network configuration can be retrieved from the ES110. HDE 04/2016 Fig.
Display In this window a short text can be entered and sent to the ES110. With the designation of an X and Y position value the text can be positioned in the display. Fig.: Positioning text Beeper In this window the duration of a signal tone (beep), e.g. 100 ms, can be entered and sent to the ES110 as a command. The ES110’s beeper sounds for the set 732.29.127 time. HDE 04/2016 Fig.
RFID In this window the RFID interface used to program the transponder media can be tested. Selecting RFID opens the window RFID. Fig.: Testing the RFID interface 732.29.127 If a transponder is placed on the ES110 and Refresh is clicked on, the transponder is read and the basic data are displayed. HDE 04/2016 Fig.
Error message If the ES110 does not recognise a network e.g. because of a missing cable or a defective network component an error message is displayed. In such a case the network needs to be inspected by the network administrator. HDE 04/2016 732.29.127 Fig.
7. Technical data 7.1 Dimensions and weight 185 57 130 34 732.29.127 Fig: Dimensions ES110 Dimensions in „mm“ Weight 360 g 7.2 LC-Display Typ 128 x 64 dots, Dot Matrix Display Format 6 lines x 20 characters Color characters black; background withe Background selectable Language English 7.3 Power supply Power supply 5 VDC Power supply PS 6 (delivered with ES110) PoE splitter PoE with PoE splitter (to be ordered separately, article number 730-2003-00013) 7.
7.5 Environmental conditions Storage tempera- -25 – 70 °C ture range Operating temperature range 10 – 50 °C Humidity 10 – 95% (non condensing) 8. Disposal NOTE Danger to environment from incorrect disposal! The environment could be put at risk if disposal is not carried out correctly • Have electrical scrap and electronic components disposed of by certifications specialist companies.
10. Approval according to Part 15 of the FCC rules NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
38 HDE 04/2016 732.29.
39 HDE 04/2016 732.29.
Alle Rechte sind vorbehalten. Text, Bilder, Grafiken in diesem Dokument unterliegen dem Schutz des Urheberrechts und anderer Schutzgesetze. Vervielfältigungen, auch teilweise, sowie die Nachahmung der Gestaltung sind verboten. 732.29.127 Copyright Haftungsausschluss Die Häfele GmbH & Co KG stellt die Inhalte dieses Dokuments mit großer Sorgfalt zusammen und sorgt regelmäßig für deren Aktualisierung.
