Specifications

SP801E LED Controller
1. Features:
1. APP controlled via WiFi, compatible with multiple Art-Net computer software ;
2. BluFi configuration using dual mode chip(WIFI&BT);
3. Support AP mode and STA mode;
4. Two layout setting method: regular rectangle layout setting and importing DXF files ;
5. Support two layers overlay, built-in multiple types of effect layers: text layer, music effect layer...;
6. The effect layers support a variety of custom parameters: direction, width, color, length, shape...;
7. Real-time preview, support recording the current scene to the controller storage;
8. Support change device name ,reorder the RGB order, and OTA update.
2. App control:
Both IOS version and Android OS version are available.
•Requires IOS version 10.0 or later, requires Android OS version 4.4 or later;
•Search “BanlanX” on the App Store or Google Play or scan this QR code to download and install the App:
3. functions:
•Button:
1.Click on the button: Switch AP/STA mode;
2.Press and hold the button: Enter the BluFi network configuration mode;
•LED Indicator：
1.Blue static: AP(Access Point) mode;
2.Green static: STA(Station) mode;
3.Green flashing: BluFi configuration mode;
•Working Modes：
1.AP(Access Point) mode:Controller and Phone connect directly, controller works as an access point.
1> Go to your phone Settings page, connect the controller(SSID like SP801E_XXX, the default password is 12345678);
2> Open the BanlanX App ,Click “+” button to configure the new SP801E controller，then the controller will be showed on the device list;
2.STA(Station) mode:Controller and phone are in one same WiFi network, in this network, users can operate the controller.
There are two ways to configure the controller into the local WiFi network:
1> Connect your phone or tablet to a 2.4G Wi-Fi network.(Doesn't support 5.0G Wi-Fi network)
2> Open the App and click“+” button to scan devices, click Add manually and select SP801E controller in the device category;
3> Input your Wi-Fi network password;
4> BluFi config and AP config:
•BluFi config: Press and hold device’s “STA/AP” button until the green led indicator flashes,then the device enters the network configuration state, click
next and selcet the device you want to add;
•AP config:Switching the device to the AP mode, click next and connect your phone’s WIFI to the named like SP801E_XXX hotspot, password is
12345678,and return to the APP;
5> Pressing next step to wait for the configure processing finish;
6>After the configuration finished, the LED indicator will turn into solid green, the controller will be showed on the device list.
•Note: 1.Users can get more help and detailed information about SP801E on the Help&FAQ page.
2.Please keep your phone, the Wi-Fi router and the controller closer together to maintain a better signal connection during configuration.
4. Specifications:
Working temperature : -20℃~60℃;
Working Voltage : DC5V~24V;
Working Current : 25mA~130mA;
Flash Capacity : 128M;
Output signal: 4-port TTL signals;
Maximum pixel number : 1024 / port;
Dimension: 80mm*41mm*20mm;
LED driver IC: Normal one-wire RZ code LED driver IC .