SR6300PM MS6X Telemetry Receiver Instruction Manual MS6X-Telemetrieempfänger-Bedienungsanleitung Manuel d’instructions du récepteur MS6X avec télémétrie Manuale di istruzioni del ricevitore MS6X con telemetria 1
EN NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com or towerhobbies.com and click on the support or resources tab for this product.
EN TABLE OF CONTENTS SR6300PM RECEIVER DIAGRAM................................................................... 4 MS6X RECEIVER INSTALLATION.................................................................... 5 BINDING AND CALIBRATING.......................................................................... 6 FAILSAFE..................................................................................................... 7 DISABLING MS6X TECHNOLOGY.............................................................
EN SR6300PM RECEIVER DIAGRAM Battery/ Programming Steering Port Throttle Port AUX 1 Port AUX 2 Port AUX 3 Port AUX 4 Port Bind Button Antenna POWERING THE RECEIVER WITH A SEPARATE RECEIVER PACK 1. Connect the steering servo to the steering port (STR) 2. Connect the throttle servo to the throttle port (THR) 3. Connect the switch harness and a 3.5V–9.6V battery to the battery (BATT) port to power on receiver. POWERING THE RECEIVER WITH AN ESC 1. Connect the steering servo to the steering port (STR) 2.
EN NOTICE: Do not connect a dedicated receiver battery to the receiver along with an ESC (with a BEC, a feature which most ESCs include). When an ESC is powered on it provides the receiver with regulated power from the main battery through the throttle connection. The ESC, battery and/or receiver may be damaged if the receiver is also connected to a dedicated receiver battery. This does not apply to an ESC without a BEC.
EN BINDING AND CALIBRATING Binding is the process of linking the SR6300PM receiver to your Spektrum transmitter. The MS6X features on the receiver can be enabled or disabled during the binding process. There is no bind plug on the SR6300PM, a button is used to put the receiver in bind mode. Bind Button IMPORTANT: You must calibrate the SR6300PM receiver each time it is placed in bind mode, regardless of MS6X being enabled or disabled.
EN IMPORTANT: You must rebind the transmitter and receiver if you: • change the servo reversing after binding • change the travel after binding • change the receiver mounting orientation • use the receiver with a different model memory • install the receiver in a different vehicle • use the receiver in 5.
EN MS6X TECHNOLOGY SETUP For the best MS6X performance, use the MS6X menu on your Spektrum transmitter to tune and manage MS6X settings. Order of operations for MS6X setup: 1. Install the receiver in your vehicle 2. Bind the vehicle and complete the calibration procedure. 3. Set up servo sub trim, reversing and travel to suit your vehicle. 4. Re-bind and complete calibration again so calibration matches the model setup. 5.
EN MS6X TUNING A value from 0 to 100 is used for three settings that affect tuning; steering gain, throttle gain, and priority. These values configure the receiver to your vehicle so you can tune it for optimal performance based on your driving style. It is normal for gain and priority tuning results to vary. WHAT IS GAIN? A gain value of 0 will result in zero electronic corrections, and a gain of 100 will result in large corrections in an effort to hold a straight line.
EN 3. Drive the vehicle through accelerated turns and observe how it responds. • If the vehicle slows down going into a turn, reduce the throttle gain. • To allow the vehicle to slide more with intentional wheel-spin, reduce the throttle gain. • To improve traction in slick conditions, increase throttle gain. • If the vehicle won’t turn-in, increase the priority. • If the vehicle spins out, there are two tuning options to consider; 1.
EN RECEIVER FIRMWARE UPDATES If firmware updates are made available for the SR6300PM receiver, you can install the update yourself. The Spektrum USB programming cable (SPMA3065, not included) and a PC are required for updates. Go to the SR6300PM product page at SpektrumRC.com for update information and to register your receiver. Registration is required to download updates. To Update: 1. Register your receiver and download the Spektrum programmer and the firmware update for the SR6300PM (when available). 2.
EN 2.
EN TELEMETRY TROUBLESHOOTING GUIDE Problem No telemetry options are available in the transmitter Possible Cause Solution You are using a transmitter Consider changing to a that does not include transmitter which includes telemetry features telemetry a different DSMR Your transmitter is in 5.
EN 1-Year Limited Warranty What this Warranty Covers—Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product purchased (the "Product") will be free from defects in materials and workmanship for one year from the date of purchase.
EN directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call the toll free telephone number referenced in the Warranty and Service Contact Information section to speak with a Product Support representative.
EN WARRANTY SERVICE AND CONTACT INFORMATION Country of Purchase Contact Address Information Horizon Service Center servicecenter. (Repairs and Repair horizonhobby.com/ Requests) RequestForm/ Horizon Product Support productsupport@ 2904 Research Rd. United States horizonhobby.com Champaign, Illinois (Product Technical of America 61822 Assistance) 877-504-0233 USA websales@ horizonhobby.com Sales 800-338-4639 Horizon Technischer service@ Hanskampring 9 Service horizonhobby.
EN IC INFORMATION CAN ICES-3 (B)/NMB-3(B) IC: 6157A-SPMSR6300PM This device contains license-exempt transmitter(s)/receivers(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following 2 conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
EN COMPLIANCE INFORMATION FOR THE EUROPEAN UNION EU Compliance Statement: Hereby, Horizon Hobby, LLC declares that the device is in compliance with the following: EU Radio Equipment Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.horizonhobby.com/content/support-render-compliance.
EN 19
© 2022 Horizon Hobby, LLC. MS6X, Active Vehicle Control, the SMART technology logo, Firma, DSM, DSM2, DSMR, Hangar 9, QuickConnect, ModelMatch, SmartSafe and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. US 9,320,977. US 10,528,060. US 9,930,567. US 10,419,970. Other patents pending.
