N BI-PROX100 Installation Instructions for PRO-100 Ceiling Mount PR OX-100C 1.0 Specifications: Enclosure: 1 Dome-Style Enclosure. Figure Environmental: Operating to 60°C Storage Temp.: -20°C to 70°C Rel. Humidity: 5th% Power: 24V DC, 130mA Typical RF Frequency: 902 928 MHz ISM Band Figure 1, Dome-Style Enclosure Nate: The PR OX-100C is shipped completely assembled und tested. DQ NOT open plastic housing as this may harm sensitive electronic components.
Total Number | PR OX-100C PR OX-100C of PR OX-100C| Evenly Spaced | End Cluster per Segment 1 1500 /. 1500 fi. 2 1100 fi. 700 ft. 4 650 fi. 350 fi. 6 450 fi. 250 ft. 8 300 ft. 150 Table 1, Total Length Per Segment Restrictions (Assuming 18 AWG Wire, Contact Customer Service for other Options) 3.0 Wiring: WARNING!!! DO NOT apply power to segments until all connections have been made and inspected. Pig-Tail Assembly: Fabricate pig-tail assembly as shown in Figure 3.
N BI-PROX100 CUT TEMPLATE FOR PR OX-100C DETECTOR 1) PLACE TEMPLATE AT IDENTIFIED MOUNTING LOCATION OF ACOUSTIC TILE 2) CUT HOLE CUT HERE / Campus-911 3 CT-20002 PRONE Communications 6340 LB Freeway, Dallas, TX, USA, 75240 Phone: (972) 687-2000 (888) 226-7911 FAX: ($72) 774-0640
N BI-PROX100 Installation Instructions for PRO-100 Wall Mount Model: PR OX-100W 1.0 Specifications: Enclosure: Patch-Style Enclosure, Figure | Environmental: Operating 10 60°C Storage Temp. C to 70°C Rel. Humidity: 51095% Power: 24V DC, 130mA Typical RF Frequency: 902 928 MHz ISM Band / Channel vd Figure 1, Patch-Style Enclosure Note: The PR OX-100W is shipped completely assembled and tested. DO NOT open plastic housing as this may harm sensitive electronic components.
Concentration 1,500 feet Max. Length Segment-1 Segment-2 Segment-3 Segment-4 Figure 2, Typical Bus line Loading Total Number PR OX-100W | PR OX-100W of PR OX-100W | Evenly Spaced | End Cluster per Segment 1 1500 fi. 1500 fi. 2 1100 &. 700 ft. 4 630 fi. 350 ft. 6 450 ft. 250 ft. 8 300 fi. 150 ft. Table I, Total Length Per Segment Restrictions {Assuming 18 AWG Wire, Contact Customer Service for other Options) 3.
4.0 Hardware: » Rolex Connector: 39-00-0039 » Rolex Pin: 39-01-2040 s Rolex Hand Crimp Tool: {1-01-0197 * Belinda Wire: 9156 * Skotchlok™ 804 (Blue) » Crimping/Striping Pliers ® #10 Plastic Anchors (Sheet-Rock applications) « #10 Lead Anchors (Concrete Applications) « #10 PPH Tamper proof Driver * No. 3 Drill Bit {Anchor Mount) * No.
N BI-PROX100 ® (DRILL HERE yee (11) DRILL TEMPLATE FOR PR OX-100W DETECTOR «4———ORIENTATION OF CHANNELIZE, (UP / DOWN) 1) PLACE TEMPLATE AT IDENTIFIED MOUNTING LOCATION 2) DRILL HOLES (4 PLACES) PER MOUNTING HARDWARE REQUIRED @ (DRILL (7) Campus-911 4 CT-20001 PRONE Communications 6340 LBJ Freeway, Dallas, TX, USA, 75240 Phone: (372) 687-2000 (B88) 226-7811 FAX: (872) 774-0640