User's Guide

1 / 4
A
N or P
(2x)
A
A
B
B
B
A
B
If drilling a new door, use the supplied template and the complete
door drilling instructions available at kwikset.com/doorprep
13/8" –2"
35 – 51 mm
A B
C
D
Is the door edge chiseled?
Is the D-shaped hole centered in the door hole?
Which latch are you installing?Hold the latch in front of the door hole, with the latch
face lush against the door edge.
1"
25 mm
YES
YES
NO
NO
Use latch “A”. If the
latch bolt is not already
extended, extend the
latch bolt as shown.
No adjustment is required.
Proceed to next step.
D-shaped hole D-shaped hole
Rotate latch face as
shown to extend latch.
UP is
on top.
UP is
on top.
wood
block
Use latch “B” (not
included). If the latch
bolt is not already
extended, extend the
latch bolt as shown.
Latch “A” Latch “B”
E
Install the strike on the door frame.
Make sure the hole in the door frame is drilled a
minimum of 1" (25 mm) deep.
or
chiseled
not
chiseled
or
1
2
Prepare the door and check dimensions
Install the latch and strike
or
23/8" or 23/4"
60 or 70 mm
backset
Measure to conirm that the backset is
either 23/8" or 23/4" (60 or 70 mm).
Measure to conirm that the hole
in the door edge is 1" (25 mm).
Measure to conirm that the door is between
13/8" and 2" (35 mm and 51 mm) thick.
Remove your existing deadbolt
from your door.
C D E F
B
Latch
“B” is not included.
If needed, please contact
Kwikset to order a drive-in
latch for your lock.
Strike
C
Keys
E
A
B
Exterior Assembly
Adapter
Ring
Batteries
D
Mounting
Plate
Parts List
Fasteners
Interior Assembly
SmartKey
Tool
H
M
F
K
L
G
Measure to conirm that the hole in the door is either
21/8" (54 mm) or 11/2" (38 mm).
or
21/8"
54 mm
11/2"
38 mm
Note: Additional door
preparation may be
required for doors with
11/2" (38 mm) holes.
Consult the deadbolt
drilling instructions at
kwikset.com/doorprep
A
Make sure your door is compatible. If you have a standard deadbolt mounted
separately from the handle below it, your door is compatible.
Mortise
Lock
Not CompatibleNot Compatible
Rim
Lock
Compatible Not Compatible
Integrated
Interior
03809 46780
N
Q
S
P
48654
64109
T
V
49191
U
C
door frame
S (2x)
Q (2x)
Longer screws
install closest to
the door jamb.
NP SQ
actual
size
68611
X
67375001
Rev 01
Installation and User Guide
Kwikset
1-866-863-6584
www.kwikset.com
ENGLISH
Required tools
Ruler
Hammer Wood block Chisel
Phillips head screwdriver
Additional Tools (depending on application)