OHP 9000-IP Dual Zone Network Audio Player powered by TM tw ne du al zo ne Li nk or k au di o Ho ts po t pl a ye r cloudstream Mo US or nit B User Manual r e ak e Sp Mi cro SD
Thank You For Choosing IntelliTouch, Powered by Cloudstream! We hope you will get much enjoyment from your Dual Zone Network Audio Player. Please read the entire contents of this manual. It is filled with reference information that will allow you to get the most from your new media player. The IntelliTouch player is powered by Cloudstream Media. If you have any questions, please go to www.cloudstream.com or call 888-825-2920.
Table Of Contents Contents Important Safety Instructions FCC Information Limited Warranty 4 5 6 Product Support 6 Operation 7 Player description 7 Connection 7 Power up your player 8 Zone 1 Message On-Hold 8 Zone 2 Streaming Business Music 8 Updating your content 8 Message On-Hold 8 Streaming Business Music 9 Functions & Controls 9 Configuration 10 Specifications 10 Wall Mounting Template 11 3
A Consumer Guide to Product Safety Important Safety Instructions Please take the time to follow the instructions in this manual carefully. It will help you set up and operate your system properly and enjoy all of the advanced features. Please save this manual for future reference. WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture. Avoid prolonged exposure to direct sunlight. WARNING: Liquids can cause a failure and/or a fire hazard.
A Consumer Guide to Product Safety FCC Information Information about products that generate electrical noise if applicable, this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
A Consumer Guide to Product Safety Limited Warranty IntelliTouch warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 1-year from date of original purchase in the United States. For Warranty service outside the United States, contact the reseller that you purchased the IntelliTouch product from.
Operation Player Description The 9000-IP series dual zone player can function as a music on-hold player or a streaming background business music player or both simultaneously. The player has two outputs/zones. Zone 1 is for message-on-hold and Zone 2 is for streaming background business music and in-store broadcasting. Content on Zone 1 can be updated in one of 2 ways: 1. Internet Connection (via Ethernet or Wi-Fi) 2.
Operation Powering up the player To turn the player on, turn the Power/Volume knob clockwise until you hear a click. The POWER LED on the top of the player will illuminate. NOTE - Player bootup will take approximately 1 minute. Zone 1 - Message On-Hold The player is preloaded at the factory with non-branded message on-hold content and will play it out of the Zone 1 output of the player upon startup. To preview the content, switch the Monitor Speaker to Zone 1.
Operation Functions and Controls Power/Volume Knob Turn clockwise to power on and to adjust volume level of the Zone 1 output jack Impedance Switch Allows selection of 8/600 Ohm output for different phone system requirements HDMI Port Used for connecting to a monitor/TV to change internal settings 8 Volume HDMI Power Jack For connection to power adapter 600 IMP Audio Out Zone 1 Ethernet Port For connection to an internet router Audio Out Zone 2 Zone 1 Output Jack Connects to the input of a phone
Configuration The player is preconfigured to work with an ethernet connection in DHCP mode. If you wish to configure the device with a static IP or connect the device via Wi-Fi please go to www.cloudstream.com and select the support link for specific instructions.
Wall Mounting Template 11
powered by cloudstream www.cloudstream.
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.