Polycom KIRK 7010/7020/7040 ® ® Charge your handset 14-16 hours prior to first use for best performance LED Alarm Button Headset Connector Display Volume Control Tear Off Unit Left Softkey Right Softkey On/Off Hook Call Transfer Four Way Navigation Key Microphone Quick Guide For more information about the handset, refer to user guide available for download at www.polycom.
Basic Handset Option Turning Handset On/Off • To turn on the handset, press left softkey. • To turn off the handset, press left softkey until the question Turn off??appears in the display. Confirm with Yes. Adjusting Speaker Volume Use the key placed at the upper right side of the handset for volume control. Locking Keypad • Press Menu followed by to lock keypad. • Press Unlock followed by to unlock keypad.
Find Name: Press top or bottom of navigation key. Exit Menu: While navigating menus, press the R button to exit out of the menu and go back to the main screen. Save contact: Dial number and press Save. Personal Shortcuts Personal shortcuts consist of functions, you have chosen to add from a list of shortcuts. The list is assigned to the right softkey. To add a shortcut: 1 Press Shortcut. 2 Scroll to Edit shortcut and press Select. 3 Press Select to add the function to the list of personal shortcuts.
Speed Dial • Press a key (0-9) continuously for three seconds until a call is started. (You must assign a key to a number in Phone Book). Assigning Speed Dials 1 Press Menu to enter the main menu. 2 Scroll the Phone Book and press the Select. 3 Scroll to Speed dial and then press Select. 4 Scroll to the appropriate speed dial entry (0-9) and then press Add name. 5 Select the appropriate phone book entry and press OK. 6 Select the appropriate number and press OK.
Answering Calls • Press to answer a call when your handset rings. Mute a Call • Press Silence and the ring signal is muted. Reject a Call Press Reject to refuse the call. Call Transfer • Press R and dial number. To withdraw the call, press R again. Note: The feature is system dependent. Turning Speakerphone On/Off (Not available on 7010) • While on a call, press Loud on to turn speakerphone on. • Press Loud off to turn speakerphone off.
key to adjust the volume. 5 Press Set and then Back. Changing Ringing Tone 1 Press Menu to enter main menu. 2 Scroll to Settings and press Select. 3 Scroll to Ringing tone and press Select. 4 Scroll to desired ringing tone and press Change to listen to chosen ringer tone. 5 Press Back. Turning Vibrator On/Off (Not available on 7010) 1 2 3 4 5 Press Menu to enter main menu. Scroll to Settings and press Select. Scroll to Vibrator and press Select. Scroll to On or Off and press Change. Press Back.
Handset Options Status To display the status of the handset options (battery, ringer volume, firmware etc.). 1 Press Menu to enter the main menu. 2 Scroll to Status and then press Select. 3 Press the top or bottom of the navigation key to highlight the appropriate menu item and then press Select to enter the menu of the selected item. 4 Press Back. Activate Bluetooth Function (7040 1 2 3 4 5 feature only) Press Menu to enter main menu. Scroll to Settings and press Select.
Auto Connect 1 2 3 4 5 6 Press Menu to enter main menu. Scroll to Settings and press Select. Scroll to Bluetooth and press Select. Scroll to Active and press Select. Scroll to Settings and press Select. Activate Auto connect by pressing Select, then press Back. The wireless headset will now connect automatically to the handset when the headset is turned on. Headset Volume Press Menu to enter main menu. Scroll to Settings and press Select. Scroll to Bluetooth and press Select.
Technical Specification Approvals EN 60950-1: 2006 EN 301 489-1 v.1.8.1 (2008-04) EN 301 489-6 v.1.3.1 (2002-08) EN 301 489-17 v.1.2.1 (2002-08) EN 301 406 v.1.5.1 (2003-07) EN 300 328 v.1.7.1 (2006-10) EN 55024:1998+A1:2001+A2:2003 (Charger only) EN 55022:2006+A1:2007 (Charger only) EN 50360:2001 Size and weight 7010 Size: 148 x 50.4 x 21.6mm/5.8 x 2.0 x 0.85in Weight: 123g/4.34oz incl. battery ± 10g/ 0.35oz. Size and weight 7020/7040 Size: 148 x 50.4 x 20mm/5.8 x 2.0 x 0.79in Weight: 115g/4.06oz incl.
Bump Test According to IEC 60068-2-27 (2008-2) Disinfectant Resistant Handset International Regulatory and Product Information This 7010 / 7020/ 7040 Handset has been marked with the CE mark. This mark indicates compliance with EEC Directive 1999/ 5/EC. A full copy of the Declaration of conformity can be obtained from Polycom Ltd, 270 Bath Road, Slough, Berkshire, SL1 4DX, UK.
5. Slots or openings in the equipment are provided for ventilation to protect it from over-heating. These openings must not be blocked or covered. 6. The product should be operated only from the type of power source indicated on the instructions. If you are not sure of the type of power supply, consult your dealer or local power company. 7. Do not overload wall outlets and extension cords as this can result in fire or electrical shock. 8.
18. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. Intrinsic safety Do not use the handset in conditions where there is a danger of electrically ignited explosions. Exposure to sunlight, heat and moisture Do not expose the wireless phone to direct sunlight for long periods. Keep the wireless phone away from excessive heat and moisture. Spare parts and accessories Use only approved spare parts and accessories.
Notices Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier.
be notified in advance to give you an opportunity to maintain uninterrupted telephone service. If you experience trouble with this telephone system, disconnect it from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning. Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to local regulations.
and manufactured not to exceed the emission limit for exposure to radio frequency (RF) energy set by the OET Bulletin 65 Supplement C. These limits are part of comprehensive guidelines and established permitted levels of RF energy for the general population. These guidelinesare based on the safety standards previously set by international standard bodies. These standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.
unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE EMC: Cet appareil a été soumis à un essai et jugé conforme aux normes régissant les limites établies pour un dispositif numérique de classe B, conformément aux règlements locaux.
Handset Icons External incoming call Internal incoming call Missed call Battery charging Keypad locked Microphone muted Silent mode For more icons, refer to user guide available for download at www.polycom.
©2010 Polycom, Inc. All rights reserved. Specifications subject to change without notice. Polycom Headquarters 4750 Willow Road Pleasanton CA 94588 (T) 14184661-HD, ED. 4, A. Rasmussens Bogtrykkeri, Ringkøbing Polycom (Denmark) Langmarksvej 34 DK-8700 Horsens Tel. +45 7560 2850 Fax +45 7560 5851 emeadk@polycom.com www.polycom.