T700 EFT-POS Installation Guide Version 1.
T700 Table of Content 1. T700 .............................................................................................. 2 Layout & Function Descriptions of T700 1.1 1.2 1.3 1.4 1.5 1.6 Main Unit & Accessories........................................................................................ Features at a Glance............................................................................................. Installation of SIM, SAM & Micro-SD Card.....................................................
T700 1 Layout & Function Descriptions of T700 1.1 Main Unit & Accessories Terminal - for transaction processing, PIN entry, printing, communication and other peripheral interfaces such as ECR integration 7.
T700 Paper Outlet 1.
T700 1.3 Installation of SIM, SAM & Micro-SD Card SAM Card (Optional) SAM Card/ SIM Card (Optional) Micro-SD Card (Optional) 1 2 SIM Card SAM Card and Micro-SD Card - for version equipped with Micro-SD card reader only 1.
T700 1.5 Paper Feeding Procedure 1 Place the paper roll into the tray as shown Press the grey button to open the paper cover 2 3 Close the printer cover 40mm Max.
T700 1.
T700 2 How to Operate 2.1 Turn On/ Off Procedure If the terminal is equipped with charging battery during first time use, please connect the power adaptor and charge the battery for 3 hours. On - Power is on whenever plugged. If the terminal is unplugged, press the key for several seconds to turn on the terminal. When the terminal displays application idle screen, it is ready for operation. Off - Disconnect the power adaptor. Keep on pressing the key for several seconds to turn off the terminal.
T700 3 Rechargeable Battery Safety Guideline 3.
T700 3.3 Terminal and Battery Storage Guideline If the battery will not be used for a long period, please charge it to only 50% of the battery capacity (battery indicator displays half full, 2 units); remove it from the terminal and store in a cool place. This can minimize the life deterioration caused by self-discharge DO NOT store bare battery together with metal, avoid humid and hot storage During storage period, please recharge the battery once every 3 months 3.
T700 4 Safety & Maintenance 4.1 Basic Safety Practice While using T700 and its accessories, please follow the safety instruction to avoid fire, electric shock and personal injury.
T700 4.3 Location for Installation Should be safe and convenient for operators and users Should be placed on stable working platform during desktop operation for ease of power and accessories connection Good ventilation and should have 22cm space around the terminal DO NOT expose the terminal in following environment ~ Near electrical appliance with high frequency EM wave such as air conditioner, electric fan, motor, neon sign etc. ~ Liquid container such as water trough, sink, pond etc.
T700 Printer Cleaning Disconnect power cable from the terminal Open printer cover, take out paper and roller Remove dust and paper scrap inside paper tray . Use low pressure blower to clean the paper tray if possible.
T700 Malfunction of printer 1, If the terminal is powered by battery, check the battery level and charge the battery, replace new battery or else power the terminal by adaptor. 2, If it is powered by power adaptor, check whether the connection of power cord or power adaptor is connected properly 3, Open printer cover, check whether the paper is used up 4, Check whether the way of paper feeding is correct, please refer to section 1.
T700 5 Other Information Dimensions & Weight Size: 171 (L) x 84 (W) x 51 (H) mm (Without magnetic stripe card reader) 171 (L) x 88 (W) x 51 (H) mm (With magnetic stripe card reader) Weight: 450g (Terminal with battery) Operating environment Temperature: 0 C - 45 C Humidity: 0% - 85% (non-condense) Power input DC 9.5V, 2.
Warning FCC RF Exposure Information and Statement: The SAR limit of USA (FCC) is 1.6W/kg averaged over one gram of tissue. Product, model number: T700 (FCC ID: VWZT700) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use when properly worn on the body is 0.939W/kg. The device was tested for typical body-worn operations with the back of the handset kept 1.5cm from the body.