T1000 E F T - P O S Installation Guide Version 1.
T1000 Table of Content 1. T1000 .......................................................................................................... 2 Layout & Function Descriptions of T1000 1.1 Main Unit & Accessories........................................................................... 2 1.2 Features at a Glance..................................................................................3 1.3 Installation of SIM, SAM & Micro-SD Card................................................4 1.
T1000 1 Layout& Function Descriptions of T1000 1.1 Main Unit & Accessories Terminal - for transaction processing, PIN entry, printing, communication and other peripheral interfaces such as ECR integration Power Adaptor (Optional) - provides 7.
T1000 1.
T1000 1.3 Installation of SIM, SAM & Micro-SD Card SAM Card Micro-SD Card (Optional) SIM Card (Optional) 1.
T1000 1.5 Paper Feeding Procedure 1. Lift up the Paper Tray Lever 2. Pull the Paper Tray Lever backward 3. Place the paper roll into the tray as shown 4.
T1000 2.1 Turn On/ Off Procedure . If the terminal is equipped with charging battery during first time use, please connect the power adaptor and charge the battery for3 hours. . On - Power is on whenever plugged. If theterminal is unplugged, press the key forseveral seconds to turn on the terminal.When the terminal displays the application idle screen, it is ready for operation. . Off - Disconnect the power adaptor. Keepon pressing the key for several secondsto turn off the terminal. 2.
T1000 3 Rechargeable Battery Safety Guideline 3.1 Prohibition: Improper handling of the Li-Polymer battery ishazardous, the following forbidden activities must be avoided: . DO NOT use NON-SPECTRA provided batteryin SPECTRA POS Terminal . DO NOT use a charger that is not specificallydesigned to charge Lithium Polymer Battery . DO NOT operate the terminal, charge up orstore the battery under high .temperature (underdirect sunlight or inside a roasting vehicle) orclose to heat source (fire, heater) .
T1000 3.3 Terminal and Battery Storage Guideline . If the battery will not be used for a long period,please charge it to only 50% of the batterycapacity (battery indicator displays half full,2 units); remove it from the terminal and storein a cool place. This can minimize the lifedeterioration caused by self-discharge . DO NOT store bare battery together with metal,avoid humid and hot storage . During storage period, please recharge thebattery once every 3 months 3.4 Accident Handling .
T1000 4 Safety & Maintenance 4.1 Basic Safety Practice . While using T1000 and its accessories,please follow the safety instruction to avoidfire, electric shock and personal injury. . Read this instruction in detail . Disconnect the power and accessories beforecleaning, use dry flannelette and soft brushfor cleaning . Do not put the terminal near water . Do not spray any liquid onto the terminal . For desktop purpose, put the terminal onstable platform to avoid damage by drop .
power and accessories connection . Good ventilation and should have 22cm space around the pinpad . DO NOT expose the terminal in following environment ~ Near electrical appliance with high frequency EM wave such as air conditioner, electric fan,motor, neon sign etc. ~ Liquid container such as water trough, sink, pond etc. ~High temperature or humidity place ~ High containing of VOC, salty and dusty area ~ Sunlight or high thermal radiation area ~ Near demagnetizing system and magnetic security system 4.
T1000 Send for repairing . If it is necessary to send back T1000 for repairing, please contact agency, pack theterminal properly (use original packingmaterial if possible) to avoid damage duringtransportation 4.5 Trouble Shooting T1000 has been designed to provide stableservice for users. However, there would besome minor problems during in use. Beforesending back for repairing, users can try thefollowing simple procedures to fix theproblems themselves Terminal not function 1.
T1000 type,please refer to section 1.5 6. Check whether the paper is jammed or damaged. Try to open the printer cover andsmooth the paper path. 7, Contact agency if problem cannot be solved Malfunction on magnetic card reader 1. Check whether the way of card swiping is correct, speed is normal, please refer to section 2.2 2. Try to swipe in opposite direction 3. Try to use another card 4. Contact agency if problem cannot be solved Malfunction on IC card reader 1.
T1000 5 Other Information Dimensions & Weight Size: 171 (L) x 88 (W) x 61 (H) mm(Excluded protruded part) Weight: 490g (Terminal with battery) Operating environment Temperature: 0°C - 45°C Humidity: 0% - 85% (non-condense) Power input DC 9V, 3A Message for product approval This product complies with the following standards .CE approval .FCC approvalFCC ID: VWZT1000I .This manual is subject to change withoutprior notice EU Regulatory Conformance Hereby, SPECTRA Technologies Holdings Co., Ltd.
T1000 Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The highest SAR value for the device as reported to the FCC when tested for use when worn on the body, as described in this user guide, is 0.061W/kg (Body-worn measurements differ among devices, depending upon available enhancements and FCC requirements.) While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement.