T1000 EFT-POS Installation Guide Version 1.
T1000 Table of Content 1. T1000 .............................................................................................. 2 Layout & Function Descriptions of T1000 1.1 Main Unit & Accessories........................................................................................... 2 1.2 Features at a Glance................................................................................................. 3 1.3 Installation of SIM, SAM & Micro-SD Card....................................................
T1000 1 Layout & Function Descriptions of T1000 1.1 Main Unit & Accessories Terminal - for transaction processing, PIN entry, printing, communication and other peripheral interfaces such as ECR integration 3.
T1000 Paper Outlet 1.
T1000 1.3 Installation of SIM, SAM & Micro-SD Card SAM Card 1 Micro-SD Card (Optional) 2 SIM Card (Optional) 1.
T1000 1.5 Paper Feeding Procedure 1 Lift up the Paper Tray Lever 2 Pull the Paper Tray Lever backward 3 Place the paper roll into the tray as shown 4 Close the Paper Tray Cover Paper roll size 57mm (2 1 ") 4 Installation Guide 40mm Max.
T1000 2 How to Operate 2.1 Turn On/ Off Procedure If the terminal is equipped with charging battery during first time use, please connect the power adaptor and charge the battery for 3 hours. On - Power is on whenever plugged. If the terminal is unplugged, press the key for several seconds to turn on the terminal. When the terminal displays the application idle screen, it is ready for operation. Off - Disconnect the power adaptor. Keep on pressing the key for several seconds to turn off the terminal.
T1000 3 Rechargeable Battery Safety Guideline 3.
T1000 3.3 Terminal and Battery Storage Guideline If the battery will not be used for a long period, please charge it to only 50% of the battery capacity (battery indicator displays half full, 2 units); remove it from the terminal and store in a cool place. This can minimize the life deterioration caused by self-discharge DO NOT store bare battery together with metal, avoid humid and hot storage During storage period, please recharge the battery once every 3 months 3.
T1000 4 Safety & Maintenance 4.1 Basic Safety Practice While using T1000 and its accessories, please follow the safety instruction to avoid fire, electric shock and personal injury.
T1000 4.3 Location for Installation Should be safe and convenient for operators and users Should be placed on stable working platform during desktop operation for ease of power and accessories connection Good ventilation and should have 22cm space around the pinpad DO NOT expose the terminal in following environment ~ Near electrical appliance with high frequency EM wave such as air conditioner, electric fan, motor, neon sign etc. ~ Liquid container such as water trough, sink, pond etc.
T1000 Printer Cleaning Disconnect power cable from the terminal Open printer cover, take out paper and roller Remove dust and paper scrap inside paper tray . Use low pressure blower to clean the paper tray if possible.
T1000 Malfunction on printer 1, If the terminal is powered by battery, check the battery level and charge the battery, replace new battery or else power the terminal by adaptor. 2, If it is powered by power adaptor, check whether the connection of power cord or power adaptor is connected properly 3, Open printer cover, check whether the paper is used up 4, Check whether the way of paper feeding is correct, please refer to section 1.
T1000 5 Other Information Dimensions & Weight Size: 171 (L) x 88 (W) x 61 (H) mm (Excluded protruded part) Weight: 480g (Terminal with battery) Operating environment Temperature: 0 C - 40 C Humidity: 0% - 85% (non-condense) Power input DC 9.5V, 2.4A Message for product approval This product complies with the following standards CE approval 0700 FCC approval FCC ID: VWZT1000I This manual is subject to change without prior notice EU Regulatory Conformance Hereby, SPECTRA Technologies Holdings Co.
T1000 EFT-POS SPECTRA TECHNOLOGIES HOLDINGS CO.LTD. Unit 1301-09,19-20, Tower II, Grand Century Place, 193 Prince Edward Road West, Kowloon, Hong Kong Tel : (852) 2319 2918 Fax: (852) 2319 2631 www.spectratech.
FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your EFT POS In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
