T1000 EFT-POS Installation Guide Version 1.
T1000 Table of Content 1. T1000 .............................................................................................. 2 Layout & Function Descriptions of T1000 1.1 Main Unit & Accessories........................................................................................... 2 1.2 Features at a Glance................................................................................................. 3 1.3 SIM、SAM Micro-SD Installation of SIM, SAM & Micro-SD Card...................... 4 1.
T1000 1 Layout & Function Descriptions of T1000 1.1 Main Unit & Accessories Terminal - for transaction processing, PIN entry, printing, communication and other peripheral interfaces such as ECR integration 7.
T1000 Paper Outlet 1.
T1000 1.3 Installation of SIM, SAM & Micro-SD Card SAM Card 1 Micro-SD Card (Optional) 2 SIM Card (Optional) 1.
T1000 1.5 Paper Feeding Procedure 1 Lift up the Paper Tray Lever 2 Pull the Paper Tray Lever backward 3 Place the paper roll into the tray as shown 4 Close the Paper Tray Cover Paper roll size 57mm (2 1 ") 4 Installation Guide 40mm Max.
T1000 2 How to Operate 2.1 Turn On/ Off Procedure If the terminal is equipped with charging battery during first time use, please connect the power adaptor and charge the battery for 3 hours. On - Power is on whenever plugged. If the terminal is unplugged, press the key for several seconds to turn on the terminal. When the terminal displays the application idle screen, it is ready for operation. Off - Disconnect the power adaptor. Keep on pressing the key for several seconds to turn off the terminal.
T1000 3 Rechargeable Battery Safety Guideline 3.
T1000 3.3 Terminal and Battery Storage Guideline If the battery will not be used for a long period, please charge it to only 50% of the battery capacity (battery indicator displays half full, 2 units); remove it from the terminal and store in a cool place. This can minimize the life deterioration caused by self-discharge DO NOT store bare battery together with metal, avoid humid and hot storage During storage period, please recharge the battery once every 3 months 3.
T1000 4 Safety & Maintenance 4.1 Basic Safety Practice While using T1000 and its accessories, please follow the safety instruction to avoid fire, electric shock and personal injury.
T1000 4.3 Location for Installation Should be safe and convenient for operators and users Should be placed on stable working platform during desktop operation for ease of power and accessories connection Good ventilation and should have 22cm space around the pinpad DO NOT expose the terminal in following environment ~ Near electrical appliance with high frequency EM wave such as air conditioner, electric fan, motor, neon sign etc. ~ Liquid container such as water trough, sink, pond etc.
T1000 Printer Cleaning Disconnect power cable from the terminal Open printer cover, take out paper and roller Remove dust and paper scrap inside paper tray . Use low pressure blower to clean the paper tray if possible.
T1000 Malfunction on printer 1, If the terminal is powered by battery, check the battery level and charge the battery, replace new battery or else power the terminal by adaptor. 2, If it is powered by power adaptor, check whether the connection of power cord or power adaptor is connected properly 3, Open printer cover, check whether the paper is used up 4, Check whether the way of paper feeding is correct, please refer to section 1.
T1000 5 Other Information Dimensions & Weight Size: 171 (L) x 88 (W) x 61 (H) mm (Excluded protruded part) Weight: 490g (Terminal with battery) Operating environment Temperature: 0 C - 45 C Humidity: 0% - 85% (non-condense) Power input DC 9V, 3A Message for product approval This product complies with the following standards CE approval 2200 ! FCC approval This manual is subject to change without prior notice NOTE: This equipment has been tested and found to comply with the limits for a Class B digi
T1000 Notes The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
T1000 EFT-POS SPECTRA TECHNOLOGIES HOLDINGS CO.LTD. Unit 1301-09,19-20, Tower II, Grand Century Place, 193 Prince Edward Road West, Kowloon, Hong Kong Tel : (852) 2319 2918 Fax: (852) 2319 2631 www.spectratech.
SAR INFORMATION THIS MODEL EFTPOS MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless EFTPOS is a radio transmitter and receiver. It is designed and manufactured not toexceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.