WLAN-11b/g SDIO WLAN Card www.spectec.com.tw WL AN -11 b FC 00 C ID:S2 12 YMIN E6 IWL 00 AN11 05 B 06 Wireless/Internet SDIO WLAN card TM 802.11b www.spectec.com.tw WLAN-11b SDIO WLAN Card User’s Manual ver. 1.
Installation Procedure < First, connect PDA to your computer with a USB wire.
< Choose the desired Language, then click OK. 1 2 < The Installation menu will automatically appear on the screen.
< Enter user information, then click Next.
< The driver will be installed automatically. < Click Yes to proceed with installation. Click OK to finish installation. 9 10 < Click Finish to complete the driver installation process.
Inserting the SDIO WLAN Card into a PDA < Check the direction of the card. Insert the card with the label side facing the front of the PDA until it clicks. 1 WLAN-11b 2 FCC ID:S2YMINIWLAN11B 0012E6000506 TM 802.11b www.spectec.com.tw WLAN-11b # Different PDAs may have different drives. Make sure the direction is correct to avoid damaging the PDA’s SD drive. TM 802.11b www.spectec.com.
How to Connect < After install the software, start path as Start\Programs. < After inserting the card into the PDA, click Start. Click Programs on the pull-down menu, then select .(Only built-in 11b card for PCC2003) TM 802.11b www.spectec.com.tw WLAN-11b 2 < Click to open the WLAN Utility window.
In “Radio” page of WLAN Utility, you may check S/W Radio Off/on for Enable/ Disable Wi-Fi card, or you can also find a shortcut icon at the lower right hand corner of the screen.
How to Connect Ad-hoc 2 3 4 TM 802.11b www.spectec.com.tw WLAN-11b 1 5 PS: Ch Channe anne 12 12 is the channel in America America 6 1. In WLAN Utility, select Ad-Hoc Channel (must be channel1). 2. Click OK to exit WLAN Utility. 3. Remove the card from PDA, then re-insert the card. 4. Go to PDA system: Settings\Connections\ Network Cards. 5. Click Add New. 6. Type in the name (ex. aa). 7. Check the “This is a device-to-device (ad-hoc) connection” box. 8. Click OK. The input name (ex.
