Wireless/Internet Speed Dial < Click 1. Fast change Wireless card On/off function. 2. “Open” can direct into WLAN Utility screen for more information. WLAN Utility has 3 labels (Status/Radio/About): *Status --Show SSID, IP Address, Mac Address, signal and quality info. etc. *Radio --Can Enable/Disable Wi-Fi card and power saving mode selections. < Click On button-Enables wireless network functions. < Click Off button-Disable Wireless network functions.
*About -- Shows SPECTEC connections info. < Driver: Current version of driver you installed. < Utility: Current version of utility you installed. < SPECTEC Web Site: http//:www.spectec.com.tw < Technical Support: support@spectec.com.
To Select Networks Manually 1 < From Start Menu/Setting/ Connections/Network Cards, select icon from pull down menu, click Settings, it gets into Settings/Connections Window. < Hold Connect for 2 seconds, then click OK. From the choice of Wireless Networks, you can see the all the network here.
CD info < Click Browse Contents button 1 to review all the files on CD 1 < Review all the files list on CD 13
Contact Us < Click Contact Us button 1 to review our information.
How to Upgrade Software Download the newest SD Device, please go to SPECTEC website: http://www.spectec.com.tw Click Save 1 1 How to Install Software 1. Driver (cab file) Take out the WLAN card, click “reset”, connect computer through Microsoft Active Sync, download Driver cab file copy to any list of PDA, click Yes to finish install. 2. Utility (.exe install) a. Cconnect Active Sync to PC b. Copy Utility 235.exe to myDevice/windows/startmenu/programs c. The icon will show up in Program. 3. Auto run: a.
AP Compatibility List Test condition and test environment DUT: WLAN-11b Vendor Accton ASUS Atheros BENQ BELKIN Model IG 2004W WL-500b Rate TX RX TX Auto 1.55 2.62 1.71 Buffalo WL-530g AR5002AP AWL700 F5D7230 RX TX RX TX RX TX RX TX RX TX RX TX RX 2.88 1.49 2.43 1.61 2.84 1.67 2.39 1.59 2.43 1.61 2.82 1.66 2.
Frequently Ask Question Q: After installation from CD, how many files will be installed into your device? A: After installation, you will find some dll files are installed in My Device\Windows, WLAN\Utility is in your Programs, and they are quite small, totally around 300 KB. Q: How to stop connecting the wireless/internet temporary? A: You can click “Off” button of WLAN Utility. When the 5 blue bars are white, it means Wi-Fi is disable.
Warranty Thank you for purchasing Spectec’s products. For Spectec’s products quality service, please read the list below for your rights. 1. Start the day when purchasing the product within 1 year, please provide purchasing document and purchasing date when ask for service. 2. The product passed all the quality tests, and test AP to work, suggest to use with the list for AP and other acceptable industry standard equipments. 3.
License Aggreement CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS BEFORE USING THIS PRODUCT. IT CONTAINS SOFTWARE, THE USE OF WHICHIS LICENSED BY SPECTEC, Co., Ltd., TO ITS CUSTOMERS FOR THEIR USE ONLY AS SET FORTH BELOW. IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT USE THE SOFTWARE. USING ANY PART OF THE SOFTWARE INDICATES THE ACCEPTANCE OF THESE TERMS.
WLAN-11b FCC ID:S2Y-MINIWLAN11B 0012E6000506 Specifications Interface: Support SDIO 1.0 Frequency: Fully integrated, 2.4 GHz band direct conversion transceiver Security: High performance engine for WEP, WPA, TKIP and AES support Radio Type: IEEE 802.11b support DSSS system Operating Channels: 1~11 channels for U. S. TX Data Rate: 1, 2, 5.5, 11 Mbps Data Rate Low Voltage: < Power consumption: Operating Voltage: 3.0 V – 3.5 V < Receive mode: 60 mA < Transmit mode: 116 mA for 15 dBm Pout < Avg.
WLAN-11b FCC ID:S2Y-MINIWLAN11B 0012E6000506 Thank You for Purchasing Spectec’s Products Spectec Computer Co., Ltd. www.spectec.com.