WLAN-11b Wireless/Internet Mini SDIO WLAN card WLAN-11b FCC ID:S2Y-MINIWLAN11B 0012E6000506 Mini SDIO WLAN Card User’s Manual ver. 1.
Content Inside Package ................................................................................................P.1 System Requirement & Installation Description.............................................P.1 Installation Steps ..........................................................................................P.2~5 How to put a Mini SDIO WLAN card in of a PDA ..........................................P.6 How to get a Mini SDIO WLAN card out of a PDA .......................................P.
Thank you for purchase SPECTEC Mini SDIO WLAN card, it is the most smallest SDIO Wireless/Internet WLAN card on the market, easy to install and use, unlimited online use and connect wherever you are. Inside Package Mini SDIO Wi-Fi Card WLAN-11b WLAN-11b FCC ID:S2Y-MINIWLAN11B 0012E6000506 Driver & User Guide CD System Requirements & Installation Description 1. This type of Mini SDIO Wi-Fi Card can only be used in Pocket PC. Windows Mobile 2003 or above Operation System. 2.
Installation Steps < First, please use USB wire to connect between PDA and your computer.
< Chose Language to set up then click Yes 1 2 < Installing menu will show on the screen automatically < Click Next 3
< Type Customer Information then click Next 4 5 6 < Chose Setup type, then click Next 7 8 4
< Auto installing < To install click Yes, after finished installing, click Yes to finish install 9 10 < Click Finish to complete the driver installation 11 5
How to put a SDIO WLAN card in of a PDA WLAN-11b < Check the direction of angularity of the card before put a Mini SDIO WLAN card in of a PDA. The angularity of the card needs to be same direction as PDA. FCC ID:S2Y-MINIWLAN11B 0012E6000506 2 1 WLAN-11b FCC ID:S2Y-MINIWLAN11B 0012E6000506 WLAN-11b FCC ID:S2Y-MINIWLAN11B 0012E6000506 # Different PDA has different drive. Make sure the direction is correct or your will damage the PDA SD drive.
How to Connect < After install the software, start path as Start\Programs. < After put the card into a PDA, click Start, menu comes out, then click Programs, select the .
In “Radio” page of WLAN Utility, you may check S/W Radio Off/on for Enable/ Disable Wi-Fi card, or you can also find a shortcut icon at the lower right hand corner of the screen.
How to Connect Ad-hoc 2 3 4 1 5 PS: Ch Channe anne 11 11 is the channel in America America 6 1. In Programs, select Ad-hoc channel (1-11) 2. Click OK, then leave Program 3. Please draws back the take card out from PDA, and put the card back in again 4. Go to PDA system Setting\Connect\ Wireless Card 5. Click Add 6. Type name (ex: aa) 7. Please check “This is a device-to-device (ad-hoc) connection 8.
