INSTRUCTION MANUAL PBM60A -‐ 60 WATT RMS PUBLIC ADDRESS AMPLIFIER PBM60AT -‐ 60 WATT RMS PUBLIC ADDRESS AMPLIFIER WITH TUNER PBM60AU -‐ 60 WATT RMS PUBLIC ADDRESS AMPLIFIER WITH TUNER/CD/USB 1 For more information contact Speco Technologies 200 New Highway, Amityville,
PRECAUTIONS 1. Unpacking After removing the amplifier from the carton, inspect for any exterior damage to the unit. If damage is noted, notify the carrier at once so that a claim can be justified. Save all packing material. This is important when the claim is processed. 2.
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Read these instructions completely. Keep these instructions for future reference. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block ventilation openings. Install in accordance with instructions.
Thank You! We at Speco Technologies thank you for your purchase of our PBM60A, PBM60AT or PBM60AU amplifier. The PBM60A represents Speco Technologies next generation of commercial public address amplifiers. We have taken our customers’ input and created the perfect amplifier for almost any application.
SECTION 1: FEATURES AND SPECIFICATIONS • • • • • • • • • • • • • 60W RMS/120W Max Power AC 115V, 60Hz 3 XLR Microphone inputs with selectable phantom power (Mic 1 has selectable priority) Telephone paging input Music on hold output 5 zoned speaker outputs (70 or 25V) Non-‐zoned 4/8/16 Ohm output RCA or XLR line output Front Bass and Treble
3) 4) 5) 6) through IR remote control. b. If a zone is turned on, the LED above the zone button will illuminate. Volume Level Indicator: a. This display will indicate the level of volume of the amplifier. b. Volume can be changed either using the Master Volume Knob (#9) or by using the IR remote control IR receiver: a.
Section 2: Controls and Connections REAR PANEL 12) Main Power Switch: a. This switch will completely turn the amplifier power on and off. 13) Commercial Speaker Zone Outputs: a. This amplifier comes complete with both constant voltage and constant impedance outputs.
are on hold, or for using the features of the phone system to send a page via a specific output on the phone system. Installation instructions vary widely by manufacturer. If unsure, please contact a professional. 15) Music-‐on-‐hold (MOH) Volume Knob: a. This knob will allow you to adjust the volume of the MOH output.
to daisy chain amplifiers. 26) Auxiliary Inputs: a. These inputs accept right and left channel RCA inputs. 27) Phantom Power Switch: a. This amplifier provides phantom power to the appropriate microphones. b. This switch will turn the phantom power feature on and off for each microphone input. 28) Microphone Inputs: a.
SECTION 3: REFERENCE INFORMATION The following information is provided for reference only. Please consult a professional if unsure about any aspects of commercial or residential installations. SPEAKER CONNECTION The rear panel of the amplifier contains 5, zoned speaker connections.
TELEPHONE LINE A telephone line input of 600 Ohms is provided. For phone systems with this feature, a Music on Hold output is also available. WHENEVER IN DOUBT ABOUT INSTALLATION, CONSULT WITH A PROFESSIONAL INSTALLER OR TECHNICIAN.
• • • • • • • • • • STOP/ EJECT: Will stop playing while source is active, or will eject CD if pressed when CD is inserted and no source is playing o Press to stop and the LCD display will show the total number of tracks.
2. Select desired songs by using FOLDER and SKIP button, then press RAN / ENTER button once to confirm. LCD display shows “00 01” for the first song 3. SKIP to the next song, and press RAN/ENTER twice to program as the 2nd song; LCD display shows “00 02” 4. Repeat process for more songs (Maximum of 10) 5.
SECTION 5: OPTIONAL MODULES PBM60AT SYSTEM CONTROLS • VOLUME: Turn to adjust the volume up or down relative to other inputs RADIO OPERATION • Press " BAND” to select AM / FM. • TUNING : Press to search radio stations. Press once to increase frequency by steps.
SECTION 6: IR REMOTE CONTROL There is an IR Remote control included with every PBM-‐A series amplifier. 15 For more information contact Speco Technologies 200 New Highway, Amityville, NY 11701• Toll Free: 1-‐800-‐645-‐5516•Fax: 631-‐957-‐9142 or 631-‐957-‐3880•www.specotech.
Speco Technologies is constantly developing and improving products.