Specification

THIS SPACE FOR ARCHITECT/ENGINEER APPROVAL.
400 ANCHOR MILL ROAD | NEW CASTLE, DE 19720
P: 800-537-2107 | F: 800-977-2747
WWW.SPEAKMANCOMPANY.COM
REVISION DATE: JANUARY 2015
SPECIFICATION
679
Management Systems
Registered to ISO 9001
SEE REVERSE FOR ROUGH-IN DIMENSIONS
SPEAKMAN
®
Heat Traced Combination Shower with Eye/Face Wash System
SE-7001
FEATURES:
• Wrapped with heat trace cable, insulation, easy access shell to protect
to –50°F
• Activated by Powder coated high visibility yellow, aluminum
triangular pull rod
• 8 in. Diameter yellow plastic showerhead
• Freeze Valve activates automatically below 40°F
• 1 in. NPTF chrome plated brass stay-open ball valve
• 1 in. IPS galvanized steel pipe
• 1 in. NPT male, top supply inlet
• 20 gpm @ 30 psi
• Universal emergency sign included
EYE/FACE WASH
• (2) yellow plastic spray outlets with automatic ow control and
ip-top dust caps
• ½ in. NPT, 3-way chrome plated brass ball valve
• 4.5 gpm @ 30 psi
• Stainless steel push handle activation
ELECTRIC
• Self-regulating heating cable with braided metal shield
• Preset, hermetically sealed single pole contact switch. Temperature range
60º to 70º F thermostat
• Closed cell rubber foam insulation
• NEMA 4X water tight and dust tight, suitable for indoor or outdoor loca-
tions junction box
• 120 vac, 60 cycle, single phase
• Electrical Classication Class 1 Division 2 GRP. B, C, D
• Ground Fault Protection: Installation will require minimum 30 mA GFPD
COMPLIANCE:
• Certied to ANSI/ISEA Z358.1, Factory Mutual Approved
OPTIONS:
ADD SUFFIX TO MODEL #
INTEGRAL
• Drench hose option ❑ -DH
• Immersion well thermometer ❑ -IT
• Scald protection valve ❑ -SPV-7000
• 1½ in. union ❑ -UN1
FIELD INSTALLED ACCESSORIES
• Area light for non-hazardous locations - clear globe ❑ -VPL
• Area light for Class 1 Division 2 areas - clear globe ❑ -VPL-C1D2
WARRANTY:
• 3 year limited
FM