Specification

THIS SPACE FOR ARCHITECT/ENGINEER APPROVAL.
400 ANCHOR MILL ROAD | NEW CASTLE, DE 19720
P: 800-537-2107 | F: 800-977-2747
WWW.SPEAKMANCOMPANY.COM
REVISION DATE: SEPTEMBER 2014
SPECIFICATION
637
Management Systems
Registered to ISO 9001
SEE REVERSE FOR ROUGH-IN DIMENSIONS
Instructions for Models:
SE-490
SE-495
SE-580
SE-582
Need Help?
For additional assistance or service call:
SPEAKMAN Company
400 Anchor Mill Road
New Castle, DE 19720
PHONE: [phone]
WEB: www.speakmancompany.com
92-SE-490-582-R2
What You Need To Know:
Tools:
Required:
*Socket Wrench
①
After selecting a suitable mounting location,
measure to ensure the spray head height is
between 33”- 45” from the floor. Mark and
drill holes according to hardware selection
specifications.
Using appropriate hardware (not included),
affix bowl to mounting surface. Using a Level,
confirm the bowl is both level and plum.
Connect a uninterruptable potable water supply
with a minimum flowing pressure of 30psi and a
maximum static pressure of 80psi to the 1/2”
NPT female water supply inlet.
②
③
*Drill
Connect the drain trailpiece to an adequate
drain in accordance with local plumbing codes.
To test, and for subsequent operation, push
the Paddle Handle forward 90˚. The unit will
operate until the Paddle Handle is manually
pulled back to the OFF position.
4
5
*Crescent
Wrench
*Level
Always wear eye protection.
ANSI Z358.1 states that weekly activation should be
conducted on all plumbed emergency equipment to ensure
that there is a suitable flushing fluid supply present and to
clear the supply line of any sediment build-up that could
prevent fluid from properly being delivered to the
eye/eyeface wash device, as well as to minimize microbial
contamination due to stagnant water. Also per the standard,
the unit should be checked annually to ensure the unit still
complies with the installation section (7.4) of the ANSI
Z358.1 standard. ANSI Z358.1 specifies that the height of
the spray heads is to be between 33” - 45” from the floor.
The SE-490/495/580/582 unit shall be mounted ensuring
the mounting surface (wall,etc.) and mounting hardware are
sufficient to carry the load. Be sure to read instructions
thoroughly before beginning installation. Do not overtighten
any connections or damage may occur. SPEAKMAN
furnishes a testing record tag (91-0635) with each unit. On
this tag, the date of inspection and the inspector’s initials
should be noted.
Please reference the parts listing for the correct repair part
numbers. Only use genuine SPEAKMAN parts when
repairing or replacing components. To order parts, call
1-800-537-2107. Be sure to turn off water supplies before
beginning any maintenance.
*Pencil
*Tape
Measure
PRESSURE
FLOW RATE
psi
bar
30
2.07
60
4.14
SE-580/582 FLOW DATA
gpm
L/min
3.2
12.1
3.4
12.9
PRESSURE
FLOW RATE
psi
bar
30
2.07
60
4.14
SE-490/495 FLOW DATA
gpm
L/min
4.5
17.0
4.6
17.4
1/2” NPT FEMALE INLET
To Drain
FEATURES:
• (2) aerated yellow plastic spray outlets
• 300 series stainless steel bowl
• ½ in. NPT female brass, chrome-plated valve
• Stainless steel push handle activator
• ½ in. NPT female inlet
• 3.18 gpm @ 30 psi
• Universal emergency sign included
COMPLIANCE:
• Certied to ANSI/ISEA Z358.1
OPTIONS:
ADD SUFFIX TO MODEL #
• Stainless steel cover ❑ -CV
• Freeze protection valve ❑ -FPV
• Hand/foot operation ❑ -HFO
• SE-920 hand held drench hose ❑ HS
• In-line strainer for ½ in. IPS piping ❑ -ILS
• P-Trap ❑ -PT
• Scald protection valve ❑ -SPV
• ½ in. stainless steel ball valve ❑ -SSBV2
WARRANTY:
• 3 year limited
SPEAKMAN
®
Wall Mounted Round Eyewash Bowl
SE-582