Owner`s manual

ManualsBrandsSpeakerCraft ManualsRemote ControlsS4VC

S4VC / S6VC

Multi-Room Speaker Selectors

with Volume Controls

OWNER’S MANUAL

SpeakerCraft

INSTALLATION

Guidelines

• Use the Multi-Room Speaker Selectors only with amplifiers rated at 125 watts per channel or less.

• The Direct Connect connectors on the S4VC / S6VC accept wire up to 14 AWG. If you are not sure about

the gauge of the wire you intend to use, please consult your SpeakerCraft dealer.

• To avoid possible damage to your amplifier, pay careful attention to the section titled "Protection Settings".

• One set of adhesive area labels is included for identifying the locations of speakers on the front of the

speaker selector.

•

Do not daisy chain (hook the outputs of one selector into the inputs of another) speaker selectors together.

• Do not connect impedance matching volume controls to the speaker outputs of the selectors. Standard

volume controls, such as SpeakerCraft models VST60, VST60fc, VST45, VCR120, VCR60 or VWS60, should

be used if additional volume controls are needed in the system.

Placement

The unique suction feet on the bottom of the selector increases placement options and holds the selector

securely when buttons are depressed. The suction feet are designed to work well with a variety of textures

that cover the tops of other components.

SpeakerCraft’s S4VC / S6VC Multi-Room Speaker Selectors with Volume Controls allow the operation of

multiple pairs of speakers when using one amplifier or receiver. Once the speakers are connected to the

selector, individual pairs may be turned on or off as desired using the push buttons on the front of the

selector. A separate volume control for each pair allows the ability to control or limit speaker volume

right at the selector. When engaged, the rear protection switch ensures safe operation, even by those

unfamiliar with the system.

Installation utilizing Direct Connect makes wiring the selector to your speakers quick and easy. With a

simple turn of a screw, wires are solidly secured and a perfect electrical bond is created. The process is

quick, simple, and eliminates the worry of wires becoming loose.

Figure 1

Protection SwitchArea Selector ButtonSuction Feet

Area Label

Volume Control Knob

Summary of content (4 pages)

PAGE 1
OWNER’S MANUAL S4VC / S6VC Multi-Room Speaker Selectors with Volume Controls SpeakerCraft’s S4VC / S6VC Multi-Room Speaker Selectors with Volume Controls allow the operation of multiple pairs of speakers when using one amplifier or receiver. Once the speakers are connected to the selector, individual pairs may be turned on or off as desired using the push buttons on the front of the selector.
PAGE 2
Page 2 2 S4VC /Eazy6 S6VC Owner’ Owner’ss Manual Manual Connecting Wires to the Speaker Selector CAUTION: Please make sure your amplifier or receiver is turned off before proceeding. Direct Connect features removable terminal connectors, which simplify connecting the speaker and amplifier wires to the Speaker Selector.
PAGE 3
S4VC / S6VC Owner’s Manual Page 2 Page 3 Eazy6 Owner’s Manual Labeling the front of the Speaker Selector (See Figure 4) There is one set of adhesive labels included to be used on the front of the Speaker Selector. These labels make it easy to identify which area has been selected when the button is depressed. There are indentations above each button on the front of the Selector. Place the appropriate area label into each of these locations.
PAGE 4
Page 4 S4VC / S6VC Owner’s Manual Specifications Description: S4VC S6VC Four Zone Multi-Room Speaker Selector with Volume Controls Six Zone Multi-Room Speaker Selector with Volume Controls Selector Power Handling: 125 Watts Per Channel Frequency Response: 20Hz - 20 kHz ± 0dB 125 Watts Per Channel Protection: Front Mounted Switch & Rear Override Front Mounted Switch & Rear Override Dimensions: (H) 23⁄8" x (W) 17" x (D) 61⁄2" (H) 23⁄8" x (W) 17" x (D) 61⁄2 Volume C