Smartico LoRa Module Document type: Datasheet Document number: DSRF8621A Document version: 1.0 Product name: LoRa Module Product number: RF86 2.1A Revision History Version 0.1 Date Jun 06, 2018 Status Preliminary Author A. Repich Change Description Initial Release 1.0 Jul 10, 2019 Release A. Repich Adapted to the hardware version 2.1 Confidential: This document is SPE SMARTICO, LLC confidential information. Possession or distribution of this document requires SPE SMARTICO, LLC consent.
Table of Contents 1 Overview ......................................................................................................................................................... 3 2 Electrical Characteristic................................................................................................................................... 4 3 Mechanical Dimensions ..................................................................................................................................
1 Overview The Datasheet describes LoRa Module produced by SPE SMARTICO, LLC. RF86 2.1A is a highly integrated low-power radio module with LORA modulation. That provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. Using LoRa modulation technique it can achieve a high sensitivity using a low cost crystal and bill of materials.
2 Electrical Characteristic Radio Frequency 862~930MHz Transmission Power 5~20dBm Receiving Sensitivity 3 Programmable bit rate up to 300 kbps Working Humidity 10%～90% (no condensation) Working Temperature -45℃ ~ 85℃ The power Supply 2.7 ~ 3.6V Transmission Current (typical) 120mA@100mW CAD/ Receives Current(typical) 13mA Sleep Current(typical) <1 uA Size 28.65mm * 14.27mm * 3mm Antenna Impedance 50Ω Mechanical Dimensions RF86 2.
4 Pin Definition RF86 2.
22 GND Power Ground Power Ground, 0V 23 RF_RESET Input/Output Reset pin, low level RESET 24 DIO0 Input/Output Digital IO 25 DIO1 Input/Output Digital IO 26 DIO2 Input/Output Digital IO 27 DIO3 Input/Output Digital IO 28 DIO4 Input/Output Digital IO 29 DIO5 Input/Output Digital IO 5 Typical Application Schematic 6 Footprint RF86 2.1A LoRa Module Datasheet SPE SMARTICO, LLC Confidential Version 1.
External view Top Bottom RF86 2.1A LoRa Module Datasheet SPE SMARTICO, LLC Confidential Version 1.
Regulatory Statements FCC Statements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
devices designed to be used by consumers or workers that can be easily re-located, such as wireless devices associated with a personal computer, are considered to be mobile devices if they meet the 20 centimeter separation requirement. A fixed device is defined as a device is physically secured at one location and is not able to be easily moved to another location.
ISED Statements This device complies with Innovation, Science and Economic Development Canada’s license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement Èconomique Canada applicables aux appareils radioexempts de licence.
