PC/HD to 1080p DVI Scaler Box Operation Manual DIGISCALE
(1).Introduction Congratulations on your purchase of the SPATZ Video Scaler DIGISCALE. Our professional Video Scaler products have been serving the industry for many years. In addition to Video Scalers, SPATZ offers a full line of high quality PC multimedia, Standard Converters, Video Processors, and HDMI/DVI devices. This manual includes operation information on the DIGISCALE. Please read this to become familiar with the DIGISCALE and keep the manual for possible reference in the future.
(4).Operation Controls and Functions 1. Power: Press the button to turn ON or turn OFF (standby) the power of the unit. 2. Menu/Enter: This button serves two purposes. a. Press the button to bring up OSD main menu as shown in the "OSD Operation". (page 7) b. To act as a "Enter" key to enter sub menu or to adjust setting value of the selected parameter. 3. +/- button: The buttons provide 3 functions: a. Input select ("+"): Press the "+" button repeatedly to select your desired input source.
The DIGISCALE accepts PC and DVI inputs. The formats supported by these inputs are as follows: - When connecting to a PC source use a 15-pin D-sub cable to connect the output of a PC to the D-Sub input connector of the DIGISCALE. - When connecting to a DVI source, use a DVI-I or DVI-D cable to connect the DVI output of a PC or DVD to the DVI input connector of the DIGISCALE.
OUTPUT Resolution/Refresh Rate DSUB DVI/HDMI 480I/576I(NTSC/PAL) x * 480P/576P V V 720P@(60/50) V V 1080I@(60/50) x V 1080P@(60/50) V V VGA@60 V V SVGA@60 V V XGA@60 V V SXGA@60 V V UXGA@60 V V WXGA@60(1280x800) V V WSXGA@60(1680x1050) V V WUXGA@60(1920x1200) V V WXGA+ @60 (1440x900) V V SXGA+@60 (1400x1050) V V Pins definition of modem cable Remote Controller PIN Definition PIN 1 NC 1 NC 2 TxD 2 RxD 3 RxD 3 TxD 4 NC 4 NC 5 GND 5 GND 6
TX Command Code Response Description S POWER 0 POWER OFF POWER OFF S POWER 1 POWER ON POWER ON S SOURCE SOURCE COMP COMP INPUT S SOURCE SOURCE PC PC INPUT S SOURCE 2 SOURCE DVI DVI INPUT S OUTPUT 0 OUTPUT NATIVE NATIVE RESOLUTION OUTPUT VGA RESOLUTION OUTPUT S OUTPUT 1 OUTPUT VGA S OUTPUT 2 OUTPUT SVGA SVGA RESOLUTION OUTPUT S OUTPUT 3 OUTPUT XGA XGA RESOLUTION OUTPUT S OUTPUT 4 OUTPUT SXGA SXGA RESOLUTION OUTPUT S OUTPUT 5 OUTPUT UXGA UXGA RESOLUTION OUTPUT S OUTPUT 6 OU
OUTPUT S CONTRAST 0~100 CONTRAST 0~100 CONTRAST 0~100 ADJUST S BRIGHTNESS 0~100 BRIGHTNESS 0~100 BRIGHTNESS 0~100 ADJUST S HUE 0~100 HUE 0~100 HUE 0~100 ADJUST [Defaut:50] S SATURATION 0~100 SATURATION 0~100 SATURATION 0~100 ADJUST S SHARPNESS 0~100 SHARPNESS 0~100 [Defaut:50] [Defaut:45] Defaut:60] SHARPNESS 0~100 ADJUST [Defaut:32] S NR 0~3 NR OFF~HIGH 0:OFF ; 1:LOW ; 2:MIDDLE ; 3:HIGH ,NR CONTROL S PCHPOSITION 0~100 PCHPOSITION 0~100 H POSITION 0~100 ADJUST S PCVPOSITION 0~100 PCVPO
RX Command Code Response Description R POWER POWER ON SHOW POWER STATUS R SOURCE SOURCE Comp, PC, DVI SHOW SOURCE STATUS R OUTPUT OUTPUT NATIVE~WUXGA SHOW OUTPUT STATUS R SIZE SIZE FULL~PANSCAN SHOW SIZE STATUS R PICTUREMODE PICTUREMODE STANDARD~USER SHOW PICTURE MODE STATUS CONTRAST CONTRAST 0~100 R BRIGHTNESS BRIGHTNESS 0~100 SHOW CONTRAST STATUS SHOW BRIGHTNESS STATUS R HUE HUE 0~100 SHOW HUE STATUS R SATURATION SATURATION 0~100 SHOW SATURATION STATUS R SHARPNESS SHARPNESS 0~10
