Quick Installation Guide

ManualsBrandsSparqLinq ManualsElectronicsuGW SparqLinq (WiFi and Zigbee)

SPARQLinq

Version 2.0 – March 2021

System Configuration and Monitoring

The SparqLinq is a communication gateway that uses Zigbee

wireless mesh networking with the QUAD

Microinverter(s). If it is connected to the internet (through Wi‐Fi or wired connection), it can automatically upload

performance information to the SPARQ cloud‐based monitoring system called SparqVu (http://sparqvu.com). The

SparqLinq internal web server and SparqVu cloud ‐based server enable an installer or system owner to quickly view

the performance of every component of their SPARQ energy system via a web browser on their smart device or

computer.

A setup wizard walks the installer through the simple configuration procedure for the SparqLinq and microinverter

system. Once configured, the SparqLinq automatically collects data from each PV module and reports it to SparqVu,

allowing a detailed real‐time view of performance information from any PV module in the system. Information such

as energy production, operational status, and power output can be easily reviewed at a glance.

This guide is primarily designed for setting up the SparqLinq itself. For full instructions on the system please see

the complete SPARQ Installation Manual.

Summary of content (6 pages)

PAGE 1
SPARQLinq Quick Installation Guide Version 2.0 – March 2021 System Configuration and Monitoring The SparqLinq is a communication gateway that uses ZigbeeTM wireless mesh networking with the QUAD Microinverter(s). If it is connected to the internet (through Wi‐Fi or wired connection), it can automatically upload performance information to the SPARQ cloud‐based monitoring system called SparqVu (http://sparqvu.com).
PAGE 2
SparqLinq Setup NOTE: DHCP is used to automatically configure the SparqLinq to connect to the installation’s network. DHCP must be configured on the router or cable/DSL/fiber modem to be able to connect to the internet. It is also required to connect the SparqLinq to the internet at least once before or immediately after installation so it can set the internal clock and perform any software updates before completing the installation.
PAGE 3
. Site Information  Enter the site information as requested.  If some information is not known at this time, it can be updated after the wizard is complete.  Click “Next Step” to continue. Note: Make sure the time is displayed correctly. Also, ensure that you choose the correct time zone. If this is not set accurately, data will not be recorded correctly. 4. Inverter Configuration  Ensure that all inverters are powered up and each LED is lit. Note that inverters do not need AC to complete this step.
PAGE 4
6. Module Details  This screen allows you to enter the details of all of the modules that are attached to each Quad. The modules are listed by inverter at the top of the page.  Click Apply and select the next module to edit.  Note: If all modules are identical, you can click “Apply to all modules” to save the same details for all modules.  Once complete, click one “Next Step”.
PAGE 5
If the Wi‐Fi connection was not successful you will see this screen. Try unplugging and moving the SparqLinq to a different location and re‐run the test from the Settings menu. SparqVU SPARQ offers complete system management for initial installation as well as ongoing monitoring of the SPARQ System production and performance. Named “SparqVu”, it offers a mobile friendly, easy to use solution for installers and end customers. The first step is to create your SparqVu account. To create an account: 1.
PAGE 6
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.