SP8836 SPARKLE COMPUTER CO., LTD.
3D GRAPHIC ACCELERATOR MANUAL
5.5.1 GeForce4 FX 5700 (NVIDIA) ................................................................. 11 5.5.2 nView Display Mode .............................................................................. 12 5.5.2.1 Standard mode ............................................................................ 13 5.5.2.2 Color correction… ........................................................................ 14 5.5.2.3 Device Adjustments .....................................................................
NVIDIA CineFX 2.0 engine -Support for DX 9 pixel shader 2.0+ -Support for DX 9 vertex shader 2.
need for panning with built-in Macrovision copy protection -DVD and HDTV-ready MPEG-2 decoding up to 1920x1080i resolutions -Dual, integrated 400MHz RAMDACs for display resolutions up to and including 2048x1536@85Hz -DVI Support for compatibility with next-generation flat panel displays with resolutions up to and including 1600x1200 -NVIDIA NVRotate™ application for advanced viewing flexibility -NVIDIA NVKeystone™ application for advanced display correction NVidia Digital Vibrance Control TM (DVC) 3.
pull straight out of the motherboard slot. If the card is stuck, rock from side to side to dislodge it. Remember to keep the screw. 4. Locate the empty slot in the motherboard and then install the card in the AGP bus slots 5. Replug the cable into the computer and replace the cover. 2.3 Installing notice (5700 Ultra only) 1. In order to make your system more stable, we recommend the minimum requirement for the power supply is 300 Watts. 2.
1024*768 1152*864 1280*960 1280*1024 1600*900 1600*1200 16 32 8 16 32 8 16 32 8 16 32 8 16 32 8 16 32 60/70/72/75/85/100/120/140/144/150/170/200/240 60/70/72/75/85/100/120/140/144/150/170/200 60/70/72/75/85/100/120/140/144/150/170/200 60/70/72/75/85/100/120/140/144/150/170/200 60/70/72/75/85/100/120/140/150/170 60/70/72/75/85/100/120/140/144/150/170 60/70/72/75/85/100/120/140/144/150/170 60/70/72/75/85/100/120/140/150 60/70/72/75/85/100/120/140/144/150/170 60/70/72/75/85/100/120/140/144/150/170 60/70
4.3 Click Driver installation 4.4 The screen will show the Confirm Installation window. Select OK 4.5 The Driver Confirmation window appears, select Install.
If the drivers are very new, you may get the following system prompt. Please click “Continue Anyway” and the software will continue to install. 4.6 Then click “Yes” to restart your computer.
4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Double-click on the Display icon in the Control Panel folder. You can also click the right mouse button anywhere on the desktop and select the Properties option from the pop-out menu.
Click on the pull-down arrow from the Color palette area to select color depth or adjust the sliding bar to either Less or More from the Desktop area Select OK to restart System and new color depth or new resolution will take effect.
optimal. Please contact your monitor supplier to get right or compatible drivers for your monitor. Otherwise you can’t select the refresh rate you want.
11
12
choose the right out put device, Do not use Auto select. Click Signal Format to select your country and TV system – NTSC or PAL, no SECAM.
14
15
16
Horizontal span mode: Picture spans horizontally on 2 monitors. Select Horizontal span, Click Apply to activate.
Dualview: Picture spans horizontally on 2 monitors. Select Dualview and Click Apply to activate. Monitor with blue frame is active. Right click on it and the configuration menu will appear. Or you can click Device Settings>> to set all the functions to “Standard mode”.
19
20
21
22
23
24
25
26
27
28
29
3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Select the Display icon Double-click on the Display icon in the Setting -> Control Panel folder. You can also click the right mouse button anywhere on the desktop and select the Properties option form the pop-out menu. Click the Settings tab. Next at, [Unknown Device.] Properties tab Select Adapter From Standard PCI Graphics… tab Select Change From Update Device … tab Select Next From Update Device … tab Select Search for a better… Then select Next.
folder and choose Settings, click the Advance Settings choose Adapter Click on the Refresh Rate sub window to change refresh rate Select OK and new refresh rate takes effect Refresh Rate default is Optimal. If you change Refresh Rate from Optimal to another, you may need to restart Windows System for functional. Note: If your monitor is not Branded or Plug&Play, you will only see Adapter default and optimal. Please contact your monitor supplier to get right or compatible drivers for your monitor.
7.2 The following steps describe how to update Windows2000 display drivers Note: If you already have old NVIDIA drivers in your system, please remove before install new drivers. To remove old Drivers: (only if you have old NVIDIA drivers) From “Start”, “Setting”, select “Control Panel”, double click “Add or remove drivers”. Then from the list, select. Find “NVIDIA WINDOWS …”, and click “install or remove” to remove it. Reboot your system and go on to the next step. 1.
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different form that to which the receiver in connected.
