NVIDIA FCC ID: M697200T2 MODEL: SP7200T285V128DV; SP7200T285V128TV; SP7200T285V128T1; SP7200T285V128PU; SP7200T285X064DV; SP7200T285X064TV; SP7200T285X064T1; SP7200T285X064PU GeForce4 Ti 4600/4400/4200 3D GRAPHIC ACCELERATOR MANUAL 1.
1. NVIDIA GEFORCE4 TI 4600/4400/4200 FEA TURES......................................................2 2. HARDWARE INSTALLATION ........................................................................................3 2.1 PACKAGE CONTENTS................................................................................................3 2.2 INSTALLING THE CARD .............................................................................................3 3. RESOLUTIONS AND COLORS SUPPORTED: .....................
1. NVIDIA GeForce4 Ti 4600/4400/4200 Features GeForce4 Ti 4600 AGP bus, with 128MB DDR SDRAM on Board Graphics core 256-BIT Fill rate (AA samples/sec.) 4.8 BILLION Operations/sec 1.23 Trillion Memory bandwidth 10.4 GB/SEC GeForce4 Ti 4400 AGP bus, with 128MB DDR SDRAM on Board Graphics core 256-BIT Fill rate (AA samples/sec.) 4.4 BILLION Operations/sec 1.12 Trillion Memory bandwidth 8.8 GB/SEC GeForce4 Ti 4200 AGP bus, with 64/128MB DDR SDRAM on Board Graphics core 256-BIT Fill rate (AA samples/sec.) 4.
Windows XP, Windows 2000, Windows Me, Windows 98, Linux Compatible API Support OpenGL 1.3 and low er DirectX 8.1 and lower 2. Hardware installation 2.1 Package Contents 1. NVIDIA GeForce4 Ti 3D Accelerator card 2. CD title or Software diskettes 3. This manual 2.2 Installing the card 1. Turn off your computer 2. Remove the cover of the computer per the owner’s manual 3. Install the card in the AGP bus slots 4. Replace the cover.
3. Resolutions and colors supported: GeForce4 Ti 4600/4400/4200 640*480 800*600 1024*768 1152*864 1280*960 1280*1024 1600*900 1600*1200 1920*1080 1920*1200 1920*1440 B.P.P.
4. Smart Installation For Windows XP, Windows 2000, Windows 98, Windows ME 4.1 Put the DRIVERS CD in your CD-ROM 4.2 Click Driver installation 4.3 If everything fine, screen will show Confirm Installation window.
4.4 Now appears the Driver Confirmation window Select Install If the drivers is very new may not certified by Microsoft, if so, system will prompt you the drivers do not have “digital signature”, still you can force to install. 4.5 Then restart your computer.
5. Manually install Windows XP drivers 5.1 Installation and Setup The Windows setup program installs and modifies all of the necessary files. Follow these steps to install the Windows XP drivers. 1. Insert the DISC (CD Title Driver). 2. Select Control Panel from Start menu 3. Select the Display icon 4. Double-click on the Display icon in the Control Panel folder. You can also click the right mouse button anywhere on the desktop and select the Properties option form the pop-out menu. 5.
Click on the pull-down arrow from the Color palette area to select color depth or adjust the sliding bar to either Less or More from the Desktop area Select OK to restart System and new color depth or the new resolution takes effect.
5.3 How to Change Refresh Rate in Windows XP 1. Make sure that you have installed windows XP Driver. Click on the Start box in the lower left corner and proceed to Setting, Control Panel 2. Inside the Control panel group, click on Display icon to open the Display Properties folder and choose Settings click the Advance Settings choose Monitor 3. Click on the Refresh Rate sub window to change refresh rate 4. Select OK and new refresh rate takes effect 5. Refresh Rate default is Optimal. 6.
10
5.4 NVIDIA Utility in Windows System 5.4.1 GeForce4 Ti 4600 / 4400 / 4200 (NVIDIA) Display Adapter Information Table, you can tell the BIOS and Drivers version, NVIDIA Chip model name, IRQ setting and many useful information. Additional properties is for advance user to setting OpenGL, Direct3D, Overlay control, Desktop Utilities and 3D antialiasing settings. NVIDIA on the Internet can reach NVIDIA official web site for more NVIDIA news.
5.4.2 nView nView have 4 modes : Standard, Clone, Horizontal span and Vertical span. If the optional connector is connected, you will be able to choose one as Windows default display device. Only the device is plugged and functional, You will be able to check the selection box. If you plug the connector after window boot up, click Detect Displays to enable the plugged output device.
5.4.2.1 Standard mode: nView disabled, only one monitor will work. Click Device Settings >> , you can select output device – Analog display, TV or Digital display. Or you can select Advanced … and select output device. Click Video output format bar to select S-Video or RCA (optional) output, default is auto select. Click Change Format to select your country and TV system – NTSC or PAL, no SECAM.
5.4.2.2 Color correction… Click Device Settings >>, select Color Correction… . This Window shows NVIDIA Digital Vibrance is functional and you can adjust Brightness, Contrast, Gamma and save it as your favorite setting. If you don’t like your adjustments, you can also check Automatically apply these settings at startup to change it back.
5.4.2.3 Screen Adjustment… Click Device Settings >>, select Screen Adjustment… You can adjust screen position. Display Timing can let you set your computer timing.
5.4.2.4 nView enable mode You need two monitors, one analog monitor (CRT) and one TV or DVI (digital display monitor). All connected well and functional. nView allow you to choose any one of the 3 different display device to be primary device, and one of the rest two to be secondary device. Clone mode: 2 monitors show the same picture, Select Clone and Click Apply to active. Horizontal span mode: Picture span horizontally on 2 monitors. Select Horizontal span, Click Apply to active.
6. Manually install Windows 98 and Windows ME drivers 6.1 Installation and Setup The Windows setup program installs and modifies all of the necessary files. Follow these steps to install the Windows 98/ME drivers. 1. Insert the DISC (CD Title Driver). 2. Select Control Pane l from My Computer group. 3. Select the Display icon 4. Double-click on the Display icon in the Setting -> Control Panel folder.
Click on the pull-down arrow from the Color palette area to select color depth or adjust the sliding bar to either Less or More from the Desktop area Select OK to restart Windows System and new color depth or the new resolution takes effect.
6.3 How to Change Refresh Rate 1. Make sure that you have installed windows 98/ME Driver. Click on the Start box in the lower left corner and proceed to Setting, Control Panel 2. Inside the Control panel group , click on Display icon to open the Display Properties folder and choose Settings click the Advance Settings choose Adapter 3. Click on the Refresh Rate sub window to change refresh rate 4. Select OK and new refresh rate takes effect 5. Refresh Rate default is Optimal. 6.
9. Select Install and click “YES” when the Installing Driver dialog box appears. If the drivers is very new may not certified by Microsoft, if so, system will prompt you the drivers do not have “digital signature”, still you can force to install. A message appears stating that drivers were successfully installed. Click OK. Another message appears stating that the driver could not be restarted dynamically. Restart Windows2000 to run the new driver. Click OK.
8. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two condition.(1).this device may not cause harmful interference, and (2).this device must accept any interference received, including interference that may cause undesired operation Warning: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
