NVIDIA GeForce2 ULTRA 3D GRAPHIC ACCELERATOR Brand : SPARKLE Model : SP6900 MANUAL 0
NVIDIA GeForce2 ULTRA User’s Manual TABLE OF CONTENTS 1. NVIDIA GeForce2 ULTRA ............................................................................................. 2 2. GeForce2 ULTRA Board Outline................................................................................... 2 2.1 GeForce2 ULTRA using DDR SDRAM (SP6900)............................................... 2 3.Hardware installation.....................................................................................................
1. NVIDIA GeForce2 ULTRA SP6900 GeFORCE2 ULTRA 64MB on Board with DDR SDRAM 1.
3.Hardware installation 3.1 Package Contents 1. NVIDIA GeForce2 ULTRA 3D Accelerator card 2. CD title or Software diskettes 3. This manual 3.2 Installing the card 1. Turn off your computer 2. Remove the cover of the computer per the owner’s manual 3. Install the card in the AGP bus slots 4. Replace the cover.
3.3 Micro Cross DVI Connector System 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 C1 C2 C3 C4 C5 “Micro Cross:”/high speed pins; C1 Analog Red Video Out C2 Analog Green Video Out C3 Analog Blue Video Out C4 Analog Horizontal Sync C5 Analog Common Ground Return (Red , Green , Blue Video Out) Note: C1 – C5 Analog signal is not support, just for SPEC. reference Main Pin Field: 1. TMDS Data 22. TMDS Data 2+ 3. TMDS Data 2/4 Shield 4. TMDS Data 45. TMDS Data 4+ 6.
3.4 Resolutions and colors supported: Bits Per pixel 640*480 800*600 1024*768 1152*864 1280*960 1280*1024 1600*900 1600*1200 8 16 32 8 16 32 8 16 32 8 16 32 8 16 32 8 16 32 8 16 32 8 16 32 Memor y Req.
4. Smart Installation For Windows 95 OSR2.1, Windows 98, WindowsNT4.0 SP3,WINDOWS Me 4.1 Put the DRIVERS CD in your CD-ROM 4.2 Click the Driver installation 4.3 If everything fine, screen will show Confirm Installation window.
4.4 Now appears the Driver Confirmation window Select the Install 4.5 Then restart your computer.
5. Manually install Windows 95 & Windows 98 drivers 5.1 Installation and Setup 5.1.1 Windows95 The Windows setup program installs and modifies all of the necessary files. Follow these steps to install the Windows 95 drivers. l Insert the DISC (CD Title Driver). l Select Control Panel from My Computer group. l Select the Display icon l Double-click on the Display icon in the Setting -> Control Panel folder.
Note: If your monitor is not Branded or Plug&Play, you will only see Adapter default and optimal. Please contact your monitor supplier to get right or compatible drivers for your monitor. Otherwise you can not select the refresh rate you wanted. l l Refresh Rate default is Optimal.
6. Windows NT 4.0 The following steps describe how to install Windows NT4.0 display drivers 1. Select Control Panel from the Main group. 2. Select the Display icon. 3. Select Change Display Type . 4. Select Change from the Adapter Type area. 5. Select Other. 6. Place the Disc (CD Title) into CDROM Drive. Click OK. 7. Select Install and click “YES” when the Installing Driver dialog box appears. 8. When the Windows NT Setup dialog box appears select CDROM, and click ”Continue ”.
7. Windows 2000 First time install drivers under windows2000 1. 2. 3. 4. 5. When system boot up, system will prompt find new device. Suppose the device is VGA, now system will find the default drivers for you. If you want to install our drivers along with the SP6900 pack. Please put the drivers CD in your CDROM drive. If now shows SmartInstall window, please click EXIT button to quit. Drivers for windows2000 are located at \2000drv\nvidia\win2000 or \drivers\nvidia\6900\win2000 If the drivers is very new m
8.Windows Me The Windows setup program installs and modifies all of the necessary files. Follow these steps to install the Windows Me drivers. l Insert the DISC (CD Title Driver). l Select Control Panel from My Computer group. l Select the Display icon l Double-click on the Display icon in the Setting -> Control Panel folder. You can also click the right mouse button anywhere on the desktop and select the Properties option form the pop-out menu. l Click the Settings tab.
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two condition.(1).this device may not cause harmful interference. (2).this device must accept any interference received, including interference that may cause undesired operation Warning: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
