NVIDIA GeForce2 MX 3D GRAPHIC ACCELERATOR MANUAL
NVIDIA GeForce2 MX User’ s Manual 1. NVIDIA GeForce2 MX ........................................................................................................ 2 1.1 NVIDIA GeForce2 MX Features ............................................................................. 2 2. GeForce2 MX Board Outline .............................................................................................. 3 2.1 GeForce2 MX using SDRAM (SP6800 REV:1)...................................................... 3 2.
1. NVIDIA GeForce2 MX Memory Size: SP6800 GeForce2 MX 32MB on Board with SDRAM 1.1 NVIDIA GeForce2 MX Features KEY FEATURES • NVIDIA shading rasterizer • 4 texels per clock • Integrated second-generation Transform and Lighting engines • 256-bit 3D and 2D graphics accelerator • 32-bit color with 32-bit z/stencil • Cube environment mapping • DirectX and S3TC texture compression • 700-Mtexel fill rate • 20 Mtriangles/sec setup • 2.
2. GeForce2 MX Board Outline 2.1 GeForce2 MX using SDRAM (SP6800 REV:1) 32M on board 2M*32 2M*32 2M*32 2M*32 2M*32 2M*32 2M*32 Nvidia GeForce2 MX DB15 2M*32 BIOS 14.318MHZ 2.2 GeForce2 MX using SDRAM (SP6800 REV:P38) 32M on board DVI SiI 164 VIDEO BIOS Nvidia GeForce2 MX DB15 14.
3. Hardware installation 3.1 Package Contents 1. NVIDIA GeForce2 MX 3D Accelerator card 2. CD title or Software diskettes 3. This manual 3.2 Installing the card 1. Turn off your computer 2. Remove the cover of the computer per the owner’ s manual 3. Install the card in the AGP bus slots 4. Replace the cover.
3.3 Micro Cross DVI Connector System 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 C1 C2 C3 C4 C5 “Micro Cross:”/high speed pins; C1 Analog Red Video Out C2 Analog Green Video Out C3 Analog Blue Video Out C4 Analog Horizontal Sync C5 Analog Common Ground Return (Red , Green , Blue Video Out) Note: C1 – C5 Analog signal is not support, just for SPEC. reference Main Pin Field: 1. TMDS Data 22. TMDS Data 2+ 3. TMDS Data 2/4 Shield 4. TMDS Data 45. TMDS Data 4+ 6.
3.4 Resolutions and colors supported: NV11 640*480 800*600 1024*768 1152*864 1280*960 1280*1024 1600*900 1600*1200 1920*1080 1920*1200 1920*1440 2048*1536 Bits Per pixel 8 16 32 8 16 32 8 16 32 8 16 32 8 16 32 8 16 32 8 16 32 8 16 32 8 16 32 8 16 32 8 16 32 8 16 32 Memory Req.
4. Smart Installation For Windows 95 OSR2.1, Windows 98, WindowsNT4.0, Windows 2000 4.1 Put the DRIVERS CD in your CD-ROM 4.2 Click the Driver installation 4.3 If everything fine, screen will show Confirm Installation window.
4.4 Now appears the Driver Confirmation window Select the Install 4.5 Then restart your computer.
5. Manually install Windows 95 & Windows 98 drivers 5.1 Installation and Setup 5.1.1 Windows95 The Windows setup program installs and modifies all of the necessary files. Follow these steps to install the Windows 95 drivers. l Insert the DISC (CD Title Driver). l Select Control Panel from My Computer group. l Select the Display icon l Double-click on the Display icon in the Setting -> Control Panel folder.
l l l l Then select OK Then show Update Device Driver Wizard tab Select CD-ROM driver Click the Specify a locator, if right Then select Next Then show Update Device Driver Wizard tab Select Next Then show Update Device Driver Wizard tab Select Finish Then show System Settings Change tab Select OK 5.1.3 Windows NT 4.0 The following steps describe how to install Windows NT4.0 display drivers 1. 2. 3. 4. 5. 6. 7. 8. Select Control Panel from the Main group. Select the Display icon.
5.1.4 Windows 2000 First time install drivers under windows2000 1. 2. 3. 4. 5. When system boot up, system will prompt find new device. Suppose the device is VGA, now system will find the default drivers for you. If you want to install our drivers along with the SP6800 pack. Please put the drivers CD in your CDROM drive. If now shows Smart Install window, please click EXIT button to quit. Drivers for windows2000 are located at \2000drv\nvidia\win2000 or \drivers\nvidia\6800\win2000 If the drivers is very
5.2 How to Change Color Depth and Resolution 1. 2. 3. 4. 5. Make sure that you have installed windows95/98 Driver. Click on the Start box in the lower left corner and proceed to Control Panel.
l l Refresh Rate default is Optimal.
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two condition.(1).this device may not cause harmful interference. (2).this device must accept any interference received, including interference that may cause undesired operation Warning: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.