Wireless Module WPEQ-450AC 5GHZ MU-MIMO 4×4 802.11AC Mini PCIe Module Standards IEEE 802.11ac/a/n (4T4R) Chipset Qualcomm Atheros 9984 Data Rate 802.11a: 54Mbps / 802.11n: MCS0~15/ 802.11ac: MCS0~9 IEEE 802.11 ac/a/n ISM Band, 5.180MHz~5.825MHz Operating Frequency *Subject to local regulations Interface PCIe Form Factor Mini PCIe Antenna 4xIPEX connectors Modulation WiFi : 802.11ac: OFDM (BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM) TX: 2250mA Power Consumption(Max.
Wireless Module OUTPUT POWER & SENSITIVITY 802.11a Data Rate Tx ± 2dBm Rx Sensitivity 54Mbps 17dBm ≦-72dBm 802.11n / 5GHz Data Rate Tx ± 2dBm (1TX) Rx Sensitivity MCS7 19dBm ≦-68dBm MCS7 19dBm ≦-66dBm HT20 HT40 802.
Wireless Module Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Wireless Module KDB 996369 D03 OEM Manual v01 rule sections: 2.2 List of applicable FCC rules This module has been tested for compliance to FCC Part 15. 2.3 Summarize the specific operational use conditions The module is tested for standalone mobile RF exposure use condition. Any other usage conditions such as co-location with other transmitter(s) or being used in a portable condition will need a separate reassessment through a class II permissive change application or new certification. 2.
Wireless Module 2.10 Additional testing, Part 15 Subpart B disclaimer This transmitter module is tested as a subsystem and its certification does not cover the FCC Part 15 Subpart B (unintentional radiator) rule requirement applicable to the final host. The final host will still need to be reassessed for compliance to this portion of rule requirements if applicable. As long as all conditions above are met, further transmitter test will not be required.
Wireless Module Industry Canada statement: This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence.
Wireless Module nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product.
Wireless Module Caution : (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p.
Wireless Module Approved antenna(s) list Model Antenna Type 5G gain with cable loss (dBi) Sparklan AD-300N Dipole 5 2 Chain(0) Chain(1) Chain(2) Chain(3) Sparklan AD-103AG Dipole 2.03 3 Chain(0) Chain(1) Chain(2) Chain(3) Sparklan AD-302N Dipole 2 Sparklan AD-303N Dipole 3 No.
