User Manual Model: WL-660GS Wireless PCI Adapter
Before You Begin You must have at least the following: • A desktop computer with an available PCI 2.2, 32-bit, 5 volt PCI slot • At least a 500MHz processor and 128MB of memory • An 802.11a, 802.11b or 802.11g Access Point (for Infrastructure Mode) or another 802.11a, 802.11b, or 802.11g wireless adapter (for Ad-Hoc; Peer-to-Peer networking mode.
Continued... The Install Screen will appear. Click Install Driver If the CD Autorun function does not automatically start on your computer , go to Start > Run and type “D:\Driver\ setup.exe.” If it does start, proceed to the next screen. Type “D:\Driver\setup.exe.” The letter “D” represents the letter of the CD-ROM drive. Your CD-ROM drive may be a different drive letter.
Continued...
Installing the WL-660GS Wireless PCI Adapter in Your Computer A. Make sure to turn off your computer and unplug the power cord before you begin. Remove the back or side cover of the computer. B. Carefully guide the WL-660GS antenna through the PCI bracket opening adjacent to the PCI slot you intend to use for the WL-660GS C. Install the WL-660GS carefully, and rmly set it into the available PCI slot (which is typically white or cream-colored). D.
Installing the WL-660GS Wireless PCI Adapter in Your Computer(cont.) F. Gently connect the antenna to the antenna stand. G.
Restart Your Computer When you restart your computer this Found New Hardware Wizard (Windows XP) screen will appear: Select Install the software automatically (Recommended) Click Next For Windows XP: This Hardware Installation alert screen may appear after the desktop computer restarts. Click Continue Anyway to nalize the installation Click Finish to nalize the installation.
Continued... For Windows 2000, this Digital Signature Not Found screen may appear after your computer restarts. Click Yes to nalize the installation. The software for this device is undergoing Windows Logo testing. Microsoft certication is pending.
Appendix For Windows XP, if you wish to use the utility, please do the following steps. Click the XP Networking icon to use the Zero Conguration Wireless Settings. Click Advanced Uncheck “Use Windows to congure my wireless network settings.
Appendix (Continued) Using the Conguration Utility A. Status: Displays the MAC address of the access point that is associated with the WL-660GS. B. SSID: The Service Set Identier is the name assigned to the wireless network. The factory SSID setting is set to default. C. Frequency: Displays the current frequency used by the current connection to the access point. D. Wireless Mode: The factory setting is set to Infrastructure. Ad-Hoc mode is used for Peer-to-Peer networking. A B C D E F G H I J E.
k. SSID: The Service Set Identier is the name assigned to the wireless network. The factory SSID setting is set to default. Make changes here to match the SSID on existing wireless router or access point. L. Wireless Mode: The factory setting is set to Infrastructure. Ad-Hoc mode is used for Peer-to-Peer networking. M. Authentication: You can specify the authentication mode for the wireless network. The default setting is set to Open Authentication. K L M N O P N.
IP Address Conguration To connect to a network, make sure the proper network settings are congured for WL-660GS. For Microsoft Windows XP: Go to Start > Right-click on My Network Places >select Properties > Right-click and select Properties on the Network Connection associated with the DWL-AG530. Click Internet Protocol (TCP/IP) Click Properties Dynamic IP address setup Used when a DHCP server is available on the local network. (i.e.
For Windows 2000 users: Go to Start > Settings > Network and Dialup Connections > Right Click and select Properties on the Local Area Connection associated with the WL-660GS. Click Internet Protocol (TCP/IP) Click Properties Dynamic IP address setup Used when a DHCP server is available on the local network. (i.e.
DGT 警語 : 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者 均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有 干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合 法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受 合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
