Table of Contents 1 INTRODUCTION..........................................................................................1 1.1 2 SET ROUTER ..............................................................................................1 2.1 2.2 3 Purpose..................................................................................................................1 Connect to TPL-111BR...........................................................................................
1 Introduction 1.1 Purpose The major purpose of this document is to illustrate how to configure the Router to work properly. 2 SET ROUTER 2.1 1. 2. Connect to TPL-111BR Connect one end of an Ethernet cable to the LAN port on the back of the TPL-111BR, and the other end to a standard port on a network device, for example, a PC. Connect the power cable to the TPL-111BR, and then plug the power cable into a power outlet.
2.2 Configure the TCP/IP Settings of your PC Before you begin Make sure that you get setup information you need from your Internet Service Provider (ISP). To set up Windows 2000 1. Right-click on My Network Places icon on the desktop and then click Properties in menu. 2. Double-click Local Area Connection icon and then click Properties button. 3. Select Internet Protocol (TCP/IP) and click Properties button. There are two ways to assign an IP address.
12. Open your web browser. Enter http://10.0.0.2 in the web browser’s address field, and press the Enter key. 13. A Login window will appear. Enter admin in the User Name field and enter admin in the Password field. 3 Basic &Homeplug network key setting 3.1 Basic setting 1.
4 LAN setting 1. Set the LAN IP and subnet mask 2. Set the LAN DHCP server enable or disable 3.
5 WAN SETTING 1. The WAN can set to DHCP client, static IP, PPPoE or Disabled 2.
6 Router Status Show the router status information 6
7 Filters Setting 1. Set LAN MAC filter to allow or deny. to use the router 2.
8 Routing setting 1. Set the router routing mode to RIPV1 or RIPV2 2.
9 Wireless Setting After setting, press Apply to let the setting work 10 Powerline 9
1. Set the Powerline network encryption key. 11 Security 1. Set the router wireless security (802.
2.
12 Upgarde Firmware 1. Upgrade the router firmware 2.
Limited Warranty TRENDware warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
TRENDWARE SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.