User's Manual

User Guide
User Guide User Guide
User Guide REV 1
REV 1 REV 1
REV 1 –
26.04.05
26.04.05 26.04.05
26.04.05
English
SouthWing SH505
Bluetooth
®
Wireless Headset
Index
Introduction
1. Charging the Headset
2. Pairing the Headset
3. Wearing and Carrying the Headset
4. General Usage
5. Push4TM call*
6. 6. Managing multiple calls
7. Troubleshooting
8. Additional Information
9. Declaration of Conformity
10. FCC regulatory notices
Note
: Please read the “Safe Usage Guidelines” and “Limited Warranty” before using the Headset.
1. Introduction
Thank you for choosing a Bluetooth® product from SouthWing.
This user guide provides all the information you will need to use and care for your product.
All relevant information regarding your SouthWing product can be found on the support section of our website:
www.south-wing.com
1. Charging the Headset
You will need to charge the battery of your Headset. To do so, follow these steps:
1. Plug the power supply into a power point
2. Plug the connector of the power supply into the USB Charging Socket [1]. The Indicator Light [2] will turn
green to indicate the Headset battery is charging
3. Once the Indicator Light [2] turns off, the Headset is fully charged and can be removed from the power supply
USB charging
Thanks to its USB charging facility, the Headset battery can be charged from any USB port, such as those found on a PC
or laptop, by using the SouthWing USB cable adaptor accessory.
Please Note:
The Headset will not function while charging.
If the Indicator Light [2] remains off when charging, the battery is already fully charged and does not
require further charging.
To maximise battery life, do not charge the Headset for extended periods of time.
®
Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. U.S.A. and licensed to SouthWing.

Summary of content (7 pages)