Quick guide For Connection on Android Devices Download APP Please Download and install the APP GuardPro before setting the IP Camera . Search “Guardpro” on Google play store or scan the QR Code below to quickly get it Android The following steps will guide you to complete the IP Camera connection.
Connect the power supply with the IP Camera，then the blue light will be on, after 2 seconds the red light is always on. And 15 seconds later the red light will be off, then the IP Camera detection by itself. For first time to use Guardpro , Click the icon “Click to add new camera”. And then click “Setup Camera”, if the blue light is blinking, you can click “Yes”, Else you need click “No”，follow the prompts to reset the IP Camera.
Insert a pin into the reset button on the back of the camera, press down and hold for 5 seconds. Wait for the camera to reset and the blue light to blink. Click the Guardpro icon to back to previous. Then click “Yes”. Enter the Wi-Fi name and password, then click “Next”. If WiFi without password，you can click “Next”. About 15 seconds later, the blue light of the IP Camera will be off, after another 5 seconds, the blue light will be always on. Then the IP Camera is already on line.
Click add icon, you will back to main screen. Now please click the preview icon to enjoy the real-time monitoring. Video record： Definition Standard Definition 640*360 Higher definition 1280*720 The Video records will be saved in your Mobile phone, you can click Video view： You can select local album to watch vedios and pictures on your mobile phone. Or you can select device event to watch vedios on IP camera. video icon ,chose "Local Album" to review these records.
Click Settings，you will see this menu. Select “Edit the Camera” to open Settings page. Here you will see “Camera ID:” , ”Username:” , ”Password:” , ”Camera Name:” , and advanced settings icon. “Reconnect” icon will Refresh the IP Camera State . ”Remove the camera” to remove this IP Camera. For protect your privacy, you need to change the password .click “settings” icon, and click “Modify Security password” icon, Input the Old key “admin” and input New key, Confirm New Key.
If you can not see the video , you need to click “reconnect” icon，to Refresh the IP Camera State . When you set the motion detection on , you will get the message when the IP Camera detected something wrong . You can close it , or view events if the IP Camera with the MicrSD in it.
Quick guide For Connection on IOS Devices Download APP Please download and install the APP Guardpro before setting the IP Camera. Search “Guardpro” on APP store or scan the QR Code below to quickly get it. IOS The following steps will guide you to complete the IP Camera connection.
Connect the power supply with the IP Camera，then the blue light will be on, after 2 seconds the red light is always on. And 15 seconds later the red light will be off, then the IP Camera detection by itself. For first time to use Guardpro, Click the icon “+”. And then click “Setup Camera”, if the blue light is blinking, you can click “Yes”, Else you need click “No”，follow the prompts to reset the IP Camera.
Insert a pin into the reset button on the back of the camera, press down and hold for 5 seconds. Wait for the camera to reset and the blue light to blink. Click the Guardpro icon to back to previous. Then click “Yes”. Enter the Wi-Fi name and password, then click “Next”. If WiFi without password，you can click “Next”. About 15 seconds later, the blue light of the IP Camera will be off, after another 5 seconds, the blue light will be always on. Then the IP Camera is already on line.
Click “Finish” icon, you will back to APP Main screen. Now please click the preview icon to enjoy the real-time Definition Standard Definition 640*360 Higher definition 1280*720 Video record： The Video records will be saved in your Mobile phone, you can click Photos icon on your Video view： You can see a list of videos on you IP camera. Mobile phone to review these records.
For protect your privacy, you need to change the password .click “basic settings” icon, input the Old Password “admin”, input New Password, and Confirm New Password. You can change the password successful. You also can modify the IP Camera Name here. In “Advanced Settings”, you can change “Mirror & Flip” , “Environment Mode” , ”Motion Detection” , “Alarm Mode” , “Record Mode” , “OSD” , “Timezone” , etc. Slide to left, you can remove the IP Camera here.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
