Instruction Manual

ManualsBrandsSOUTH ManualsElectronicsDigital radio



The instruction manual Of S6 external radio

Chapter1.Product introduction

S6 radio is a new intelligent external radio station newly developed by Southern

Satellite Navigation. It has the advantages of superior performance, comprehensive

functions and easy operation. Especially on the issue of serial frequency of the radio,

the S6 radio has built in up to 10 radio protocols and 120 radio channels.

Thoroughly solve the unnecessary troubles brought about by the work for the

customer. In the characteristics of the wireless use function, the radio and the host can

wirelessly transmit data and wirelessly control the radio. The radio station has added a

background webpage function, and the operation is simpler and more user-friendly.



Chapter2.Product appearance and accessories

1. The introduction of product appearance

 

Radio front view Rear view of the station

Radio hook

Cool fin

Indicator light

button

Display screen

Summary of content (19 pages)

PAGE 1
The instruction manual Of S6 external radio Chapter1.Product introduction S6 radio is a new intelligent external radio station newly developed by Southern Satellite Navigation. It has the advantages of superior performance, comprehensive functions and easy operation. Especially on the issue of serial frequency of the radio, the S6 radio has built in up to 10 radio protocols and 120 radio channels. Thoroughly solve the unnecessary troubles brought about by the work for the customer.
PAGE 2
Bluetooth Data light Power light Power lamp Liquid crystal display Power switch, confirmation b tt Up, down, left, right selection keys return key Transmitting antenna interface Power cord interface (4 pins) Data line interface (5 pins) Product nameplate 2.
PAGE 3
Radio power cord (4-pin interface) Radio data cable (5-pin interface) Radio transmitting antenna Chapter3. Radio display interface and function introduction The first display interface: satellite receiver system initialization information interface. The second display interface: the radio quick setting interface. The above listed radio channel information, the radio channel can be adjusted by pressing the direction selection button and the down button.
PAGE 4
The third display interface: interface of adjusting the radio channel The fourth display interface: the above listed adjusts the radio power. L represents low power. M represents medium power. H repenesents high power. The following is the tuner protocol interface. (This interface press the confirm button to enter the page turning interface) The fifth display interface: the above listed is Bluetooth switch . The following is Bluetooth mode: Slave mode and Master mode.
PAGE 5
The seventh display interface: the above listed is the resets radio factory setting. The following is restarted key.
PAGE 6
The 12th display interface: Whether to perform the close radio interface (press and hold the power off button for 3 seconds to put this meeting to display this message, press "Confirm" to turn off the radio) The 13th display interface: the radio interface is being closed. Chapter 3.The introduction of radio website: 1. Login page Connect the radio WIFI hotspot, open the web page, enter the radio backstage webpage IP 10.1.1.
PAGE 7
2 Web page function and usage introduction 2.1 Host status = system information + working status (only displays information and status when no setting function) as shown below. 2.2 Host configuration = host control (settable function) as shown below Function: 1. Motherboard 2. Radio 3. Network 4. WiFi 5. Bluetooth 6. Sensor 7. EEPROM Start self-test can be a single self-test or all self-test, clear satellite ephemeris. Restore factory settings. Restart the host. Turn off the host.
PAGE 8
2.3 Data transmission = serial port setting (settable function) as shown below Function: Baud Rate. Parity. Data Stream. Enabled. (LEMO Wired Transmission Settings. BLUETOOTH Wireless Transmission Settings) 2.
PAGE 9
PAGE 10
2.
PAGE 11
PAGE 12
PAGE 13
PAGE 14
PAGE 15
2.6 Firmware upgrade = firmware upgrade + upgrade module (settable function) as shown below 2.
PAGE 16
Chapter4. Radio wireless data transmission and control radio station introduction The wireless connection of radio and RTK. The Bluetooth of the handbook is connected to the host to set the base station plug-in mode and starts successfully. The handbook disconnects the Bluetooth connection to the radio wifi and enters the radio page 10.1.1.1 for related operation settings. (account and password are admin) The steps of Web page seting 1.
PAGE 17
2. Wireless control of S6 radio: 2.1 Connect the S6 radio wifi with mobile phones, handbooks and other Internet-connected electronic products (make sure the radio wifi hotspot is turned on before connecting) 2.2 Enter the dedicated web page 10.1.1.1 (account admin. password admin), select the radio settings to wirelessly control the S6 radio. Chapter5.
PAGE 18
System characteristics Electrical characteristics Wireless connection of base station support Antenna status monitoring support Real-time temperature monitoring support Power dynamic adjustment support power input DC 9-16V Reverse polarity support ESD protection support
PAGE 19
FCC Warning FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.