User's Manual

ManualsBrandsSouth Pacific Electronics ManualsElectronics4 Button Keyring Remote Control, PCK43304

ELSEMA

433MHz Keyring Remote with Frequency Hopping – PCK Series

PCK43302, PCK43304

433MHz Penta series Keyring Remotes with Frequency Hopping

FEATURES

 Small Size keyring remote with 2 or 4 buttons

 Dual Coding System, dip switch and encrypted code

 Transmission on 5 different frequencies

 Uses frequency hopping spread spectrum (FHSS)

 One of the most secure remote controls on the market

 FCC and AS/NZS 4268 pre-certified

APPLICATIONS

 Keyless access control for automatic gates and doors

 Home automation i.e. garden lights, swimming pool control etc.

 Wire security, lighting and automotive controls

…. and anywhere else you need a wireless signal to transmit a contact closure

DESCRIPTION

The PentaCode

dual coding system gives the installer the option to use the classic 12-way dip switch coding or

one of over 17 billion encrypted codes.

With the 12-way dip switch, just match the keyring remotes and the receiver's dip switch and it's coded. No

need for programmers, memory chips or computer databases to store the code.

With the encrypted code you switch all the 12- way dip switches OFF and the remote and receiver automatically

goes into the encrypted coding.

OEM CONFIGURATION

Elsema can customise keypad text and back labels to suit customer needs. Contact Elsema for more details.

TECHNICAL DATA

Operating Voltage

12 Volt Battery

Standby Current 1.8uA

Current Consumption 18mA (typical) at 12 Volts DC supply during transmission

Battery life 1.5 years with average use

Frequencies 433.100 to 434.700MHz

Operating range up to 80 metres depending on building structure and receiver antenna

Operating Temperature Range

-5 to 50°C

Decoding System Encrypted 17 billion codes combinations or On board 12-way code switch

Weight 30 grams

Summary of content (5 pages)

PAGE 1
ELSEMA 433MHz Keyring Remote with Frequency Hopping – PCK Series PCK43302, PCK43304 433MHz Penta series Keyring Remotes with Frequency Hopping FEATURES Small Size keyring remote with 2 or 4 buttons Dual Coding System, dip switch and encrypted code Transmission on 5 different frequencies Uses frequency hopping spread spectrum (FHSS) One of the most secure remote controls on the market FCC and AS/NZS 4268 pre-certified APPLICATIONS Keyless access control for automatic gates and doors Home au
PAGE 2
ELSEMA 433MHz Keyring Remote with Frequency Hopping – PCK Series ORDERING INFORMATION Part Number PCK43302 PCK43304 Description 2-button, Keyring Transmitter 4-button, Keyring Transmitter COMPATIBLE RECEIVERS Below is a list of compatible receivers for the PentaCode keyring remotes. PCR43301RE 1-Channel Receiver with Relay Output.
PAGE 3
ELSEMA 433MHz Keyring Remote with Frequency Hopping – PCK Series KEYRING DIMENSIONS THEORY OF OPERATION The microcontroller upon detecting an active tact switch input, reads the setting of the 12-way dipswitch. The active input and the dipswitch data is then sent to the RF IC. The RF IC sends the frequency modulated (FM) carrier to the PCB antenna via the LC filter and antenna matching.
PAGE 4
ELSEMA 433MHz Keyring Remote with Frequency Hopping – PCK Series FREQUENCY HOPPING The PCK series keyring remotes use frequency hopping spread spectrum (FHSS). When a button is pressed, Dual Coding System simultaneously transmits the code on 5 different frequencies, making it impossible for the remote to be interfered with or jammed. This allows multiple transmitters to be used in close proximity with no interference or jamming.
PAGE 5
ELSEMA 433MHz Keyring Remote with Frequency Hopping – PCK Series REGULATORY COMPLIANCE STATEMENTS American Users This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation.