User's Manual

ELSEMA
1,2,3,4,8 -Channel 27MHz GIGALINK™ Transmitter GLT2700,GLT2701,GLT2702,GLT2703,GLT2704,GLT2708
GLT2700, GLT2701, GLT2702, GLT2703, GLT2704 and
GLT2708
27MHz HAND HELD GIGALINK™TRANSMITTERS
Features
• Over 4 billion code combinations
• Can program any number of transmitters to a receiver
• High Security
Applications
• Remote control of garage doors, gates, lights, alarms
Description
The hand held GIGALINK™ transmitters are the most advanced Remote Control technology available in the
world today. GIGALINK™ is an invention that has revolutionised the entire Remote Control technology
including Elsema's earlier version of FMT- … and FMR- … series. The GLT2700/1/2/3/4/8 state-of-the-art
invention brings a new dimension in the world of Remote Control technology in domestic, commercial and
industrial applications.
The innovative microcontroller technology replaces the traditional dip switch coding which eliminates any
possible code grabbing. Special features such as over four billion code combinations and the ability to
program any number of transmitters to a receiver, adds to the most advanced and secure Remote Controls
available.
The hand held GIGALINK™ transmitters have a microcontroller in-built single and channelised code
programming system that provides flexibility in programming each channel to different receivers. Each
transmitter can store to its EEPROM, up to four random channels allowing the user to program each channel
from different single channel receivers. This is achieved when single code programming the transmitter
channels from a GLR2701, which is a single channel GIGALINK™ receiver. If the transmitter is single code
programmed from a multi channel receiver, the selected receiver's channel is programmed to the selected
transmitter channel. The channels can be selected by using the dip switches on the receiver and by pressing the
appropriate channel button on the transmitter.
Channelised code programming programs all the channels, from a multi channel receiver, to the multi channel
transmitter. That is, channel one on the transmitter activates channel one on the receiver and alternatively.
Channelised system can be either used as simple on/off functions or for several channels to operate
simultaneously such as dual or multi action control for example crane transmission control.
The transmitter can be single or channelised code programmed without power connected.
Single Code Programming
This is used for programming one channel at a time to the transmitter. To single code program a transmitter read
receivers setup instructions.
Channelised Code Programming
This is used to program all channels from a multi channel receiver to the multi channel transmitter. To
channelise code program a transmitter read receivers setup instructions.