Owner's Manual

ManualsBrandsSoundTube ManualsCommercial audio & videoSM590I-II-WX

Box contents

1 Speaker

1 Terminal weather boot

1 Mounting bracket

1 Safety cable

1 Safety cable anchor screws

1 Euroblock connector

1 Grille-mounted tap switch cover

Install Instructions For:

SM500i-II, SM500i-II-WX, SM590i-II, SM590i-II-WX speaker

1.435.647.9555

800.647.TUBE

www.soundtube.com

Do not spec or install speaker near support beam, ventilation duct or

other structure that may interfere with speaker function or dispersion.

gninraWgninraW

SoundTube speakers must be installed by a professional audio installer/contractor. For safety and for

optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.

SM5 Series

SM500i-II, SM500i-II-WX, SM590i-II, SM590i-II-WX UL1480 (UEAY) planned

1 Allen hex key

Terminal

weather boot

Clamp knob

Euroblock connector

Grille-mounted

tap switch cover

Mounting bracket

Tap switch

M3x4mm security screw

Summary of content (6 pages)

PAGE 1
SM5 Series Install Instructions For: 1.435.647.9555 SM500i-II, SM500i-II-WX, SM590i-II, SM590i-II-WX speaker | 800.647.TUBE | www.soundtube.
PAGE 2
SM5 Series Install Instructions For: 1.435.647.9555 SM500i-II, SM500i-II-WX, SM590i-II, SM590i-II-WX speaker 1. Unpack speaker and mounting hardware. 2. Choose a secure mounting sur strength to reliably hold the speaker. Note: Bracket orientation does not matter for installation of the mounting bracket. 3. Slip terminal weather boot over signal wire. For environmental applications, put RTV silicone around nipple and base when installation is complete. | 800.647.TUBE | www.soundtube.com 4.
PAGE 3
SM590i Surface-Mount Speaker Technical Information for System Engineers Key Features Mounting hardware included Specifications: SM590i System Type 5.25-inch coaxial, surface-mount, ported, high power (33-watt transformer for 25/70.7/100-volt or transformer bypass) Impedance (Nominal) 8 ohm Sensitivity dB @ 2.83V / 1 M 87 dB Sensitivity dB @ 1 W / 1 m3 87 dB Frequency Response (- 3 dB)1 100 Hz - 22 kHz Frequnecy Response (-10 dB)1 69 Hz - 22 kHz Max. Program Power 160 W Max.
PAGE 4
SM590i Surface-Mount Speaker Technical Information for System Engineers consistent high-performance music and paging for applications requiring longer throw or higher volume above the existing ambient noise level. The SM590i is ideal for suface-mount sound reinforcement/PA in applications with high ambient noise levels including casinos, warehouses, airports, transportation and shipping centers, schools, gyms, arenas and stadiums.
PAGE 5
SM590i Surface-Mount Speaker Technical Information for System Engineers Frequency Response Phase/Impedance Response 32 110 100 180 Impedance Phase 28 135 90 60 Ohms dBSPL 70 50 40 24 90 20 45 16 0 12 -45 8 -90 4 -135 0 -180 Phase(Degrees) 80 Vertical Beamwidth (-6 dB) 20000 Hertz 10000 5000 2000 1000 500 20 20000 Hertz 10000 5000 2000 1000 500 200 100 50 20 0 200 10 100 20 50 30 Directivity Index (DI) 20 360 330 300 15 270 10 210 dB 180 5 1
PAGE 6
SM590i Surface-Mount Speaker Technical Information for System Engineers Polar Plots 250 Hz 125 Hz 330 300 0 0 30 330 0 0 -6 -12 -12 -12 -12 60 300 300 60 -18 240 120 210 90 240 270 120 150 210 180 0 0 330 30 330 300 60 -18 300 60 -18 -36 90 240 120 210 270 240 120 150 210 150 180 270 0 0 30 -6 -12 300 60 60 -18 -24 -30 -30 90 -36 180 330 30 -24 -30 -30 10,000 Hz 0 0 -18 -24 -24 150 180 -12 -12 -12 210 -6 -6 -6 150 120 180 30 90