VR-75XB In DIN 7' Touch screen DVD/CD/MP3/MP4 Player AM/FM Radio Support Bluetooth Support SiriusXM-Ready Owner’s Manual Take the time to read through this owner’s manual. Familiarity with installation and operation procedures will help you obtain the best Performance from your new DVD-receiver.
WARNING! To promote safety, certain functions are disabled unless the parking brake is on. The Unit is designed to detect parked status and must be connected to the power supply side of the parking brake switch. Improper connection or use of his connection may violate applicable law and may result in serious injury or damage. To avoid the risk of damage and injury and the potential violation of applicable laws, this unit is not for use with a video screen that is visible to the driver.
CONTENTS WARNING! .................................................................................................................................. 2 OPERATION PRECAUTIONS ................................................................................................. 2 CONTENTS .................................................................................................................................. 3 ACCESSORIES .....................................................................................
ACCESSORIIES Package ccontains th he following accesso ries for ins stallation and operatioon of the unit. u (1) Wash her, Spring g Wash her, M5 Nu ut 1 each (2) Metall Mounting g Strap 1 (3) Hex B Bolt 1 (4) Screw w Max. 8mm (7 7/32 x 4 max.
INSTAL LLATIO ON / UN--INSTAL LLATION Note Before sta arting insta allation of the unit, ma ake sure th he wiring is s connecteed properly y. Use only tthe parts provided p with the unitt to ensure e proper ins stallation. The use o of unauthorrized parts s may causse malfunc ction. Install the e unit where e it does not n get in th he driver’s way and will w not injuure the pas ssenger in case there is a sudden sttop, like an n emergenccy stop.
WIRING CONNECTIONS Make sure you have good chassis ground. A good ground connection will eliminate most electrical noise problems. A good chassis ground requires a tight connection to the vehicle’s metal chassis. The area around the ground connection should be clean, bare metal without rust, paint, plastic, dust, or dirt for a good electrical connection. Caution: Do not interchange the connection of the wiring!!! For some car models you may need to modify wiring of the supplied power cord.
Connecting the rev versing lin ne to taillig ght on the e car After conn necting, wh hen you sta art up the rreverse ge ear, the unit will receiive the pictture from car c rear view camera. Note: - On nly use grou undless loudspeakerrs. - Use only lou udspeakers s of minim mal 40Wattt, using few wer watts may resu ult in dama aging you ur loudspeakers at hiigher volum mes. - Use 4~8 Ω (O Ohm imped dance) lou udspeakers s only; usin ng higher oor lesser im mpedance may dam mage the unit.
FRONT PANEL 1 2 3 4 5 6 7 8 14 9 10 11 12 13 15 16 17 18 1. TFT display 2. Release Button Press to detach and release the front panel. When release the unit will switch off automatically after a few second. Detach/Attach the Panel: Press REL button and pull out the left side to detach the panel. To attach it, insert the right side first and then press the left side until hear a click sound. 3. POWER/MUTE Button Press it to turn the unit on.
Press menu button to go into home page. 6. BAND Button In Radio mode, press to change radio band in sequence of FM1 → FM2 → FM3 →AM1 →AM2 . 7. MODE Button Press it to select different input mode: Radio, DISC (if there is a disc in unit), USB (if there is a USB device in the unit), CARD (if there is a SD/MMC card in the unit), Bluetooth, and AV IN. 8. VOLUME Button Adjust the volume level by turning the knob clockwise to increase or counterclockwise to decrease. 9.
REMOTE CONTROL 1. POWER Power it on or off. 2. MODE button Press it to select the mode: Radio, DISC (if there is a disc in unit), USB (if there is a USB device in the unit), CARD (if there is a SD/MMC card in the unit) and AV IN. 3. PLAY/PAUSE button In DVD mode, press it to stop playback, press again to resume. 4. Mute /Bluetooth button : Short press this button to mute the volume output, press it again to resume volume. Long press it enters to Bluetooth mode. 5.
Use the buttons to select the menu item. The title it track or to show next frame. 10. ENTER button Press it to confirm selection or setting. 11. Cursor buttons Use the buttons to select the menu item. The title it track or to show next frame. 12. SETUP button In DVD mode press it to enter the setup menu. 13. EJECT button Press it to eject the disc. 14. Cursor buttons Use the buttons to select the menu item. The title it track or to show next frame. 15.
Press it to Stop playback from the current position, press it again to final stop to the very beginning. Press PLAY/PAUSE button to play. Press and hold for two seconds to set PBC on/ off in VCD mode. 26. OSD button In DVD mode press it to enter the OSD menu, press and hold for 2 seconds to set video setup. (RED /GREEN /BLUE /BRIGHT / CONTRAST /SHARP /COLOR RESET /BACK) 27. VOL- button Press to decrease volume level. 28. AUDIO/GOTO button In DVD mode press it to select the audio language.
MAIN MENU The best way to discover the program is to explore each screen in detail, and to find out how to move from one to another. Read this chapter for a guided tour. Unit starts by displaying the Main menu. This is the root of the screen hierarchy, and you can simply access all features by tapping on the touch screen buttons. Tap the icons to enter a desired mode. ◆ RADIO PLAYER To start Radio, tap RADIO button on main menu screen. Touch this button can choose FM1=>FM2=>FM3=>AM1=>AM2.
◆DVD PLAYER To start DVD Player, tap on DVD icon from main menu screen. TOUCH SCREEN MENU In DVD mode, touch it can choose Repeat chapter =>repeat title =>repeat off. In VCD mode, touch it can choose Repeat REP 1 => REP DIR => REP ALL. Touch it to skip to the next track. Touch and hold for 2 seconds to activate fast forward (FF) search in a track. Touch it to skip to the previous track. Touch and hold for 2 seconds to retune to the beginning of the track.
SD/MMC Card To play MP3/ MP4/ WMA/JPEG files on a SD/MMC card, insert the card into the card slot (you should press the Open button on the panel to flip down front panel and insert the SD/MMC card into card slot.) The unit will play automatically MP3/MP4/ WMA/JPEG files. Or repeatedly press the MODE button to select SD mode. Mute the sound. Touch it to choose playing Music, Video and Picture files. Touch it to pause/play. Touch it to skip to the next track.
Sound EQ: User→Flat→Classic→Pop→Rock→User. BALANCE/FADER: Adjust the balance and fader to left or right. BEEP: Select keypad sound on or off. LOUD: Select loud on or off. LOUD LEVEL: Adjust the loud level SUBWOOFER: Turn subwoofer on or off. SUBWOOFER LPF:80HZ →120HZ→160HZ SUBWOOFER LEVEL: Adjust the subwoofer level Display BACK LIGHT: Adjust the screen backlight to LOWMID-HIGH LCD.
UNLOCK ALL CHANNELS: Select this to unlock all channels. LOCK/UNLOCK CHANNELN SET: Select this to lock or unlock selected channels. CODE CHANGE: Select this to change the parental lock code. The initial password is "0000". Follow the prompts to change the password. DEFAULT: Select this to default the parental code back to the initial password of “0000”.
SiriusX XM Vehic cle Tune er Conne ections SiriusXM Satellite Radio R opera ation reqiu red the connection of o the SiriussXM-Conn nect Vehicle e Tuner(sold separate ely). V Tun ner must have the SiriusXM loggo to be co ompatible with w Note:The SiriusXM-Connect Vehicle 5XB. the VR-75 Line up th he connencctor with th he pins on the cable.IIt can only be inserteed as show wn above. Push the cable into the head unit's u conn ector until it slicks.
*To enter a 4 Digit code, choose from the two options as below: z Enter the 4 Digit code using the remote control, by press the numbers directly. The default code is “0000” if the code has not been changed with the “CODE CHANGE” feature. Press ENTER to confirm. z Touch SETUP icon on the main menu, then press “PARENTAL LOCK” enters to “CODE CHANGE” directly input 4 digit codes. Displayed information Tuner not connected Connected Tuner Tap this icon to mute the sound.
SiriusXM Advisory Messages Message Description z Check Antenna z z Check Tuner z Check the SiriusXM tuner connection behind the VR-65XB to ensure that it is correctly connected. z The vehicle must be outside, and the antenna must have a clear view of the southern sky. The magnetic antenna must be mounted on the outside of the vehicle for the best reception. An updated to your SiriusXM subscription has been received by the SiriusXM tuner. Touch any keys to continue.
Tap Missed calling button to check missed calls. Tap Phone Book button to use phone book functions. Tap this icon translate Bluetooth to mobile mode. Tap this icon to clear number. Tap this button Hand up and reject calling. Tap this button Making and accept calling. Pairing Mode At the 1st time when using BLUETOOTH, you need to pair the mobile phone first.When a phone have not been paired with the unit, the BT icon and Pairing mark will blink continually on the panel.
3. In calling/Out calling mode Tap In calling button or Out calling to see received and dialed calls.The unit can download automatically all the date from the mobile Phone.Dialed/Received/Missed calls are saved In History mode .Tap Up/Down arrow load previous/next history record.The calls in each category are saved from the latest one to the final one.Select a number and tap Send button to enter calling mode. 4.
NOTES ON DISC Only use groundless loudspeakers. Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your loud speakers at higher volumes. Use 4~8 Ω (Ohm impedance) loudspeakers only; using higher or lesser impedance may damage the unit. Do not use 3-cable loudspeakers and do not connect the loudspeakers minus to the car body. (GND). using a BTL circuit and each loudspeaker must be connected with insulated cables according the diagram.
TROUBLESHOOTING Symptom LCD CD General Power does not turn on. (No sound is produced.) No sound output when operating the unit with amplifiers or power antenna attached. Cause Remedy Fuse is blown In correct wiring Power antennal lead is shorted to ground excessive current is required or remote on the amplifiers or power antenna. Nothing happens The microprocessor When buttons are has malfunctioned pressed. due to noise, etc.
TROUBLESHOOTING SYMPTOM NO POWER DISC CANNOT BE LOADED. CAUSE THE CAR IGNITION IS NOT ON. THE FUSE IS BLOWN. REPLACE THE FUSE. PRESENCE OF DISC INSIDE THE PLAYER REMOVE THE DISC IN THE PLAYER THEN PUT A NEW UPWARD. INSERT THE COMPACT DISC WITH THE LABEL FACING UPWARD. CLEAN THE DISC OR TRY TO PLAY A NEW ONE. INSERTING THE DISC IN UPSIDE DOWN. DISC CANNOT BE READ. NO SOUND THE OPERATION KEYS DO NOT WORK. SOUND SKIPS. THE RADIO DOES NOT WORK, THE RADIO STATION AUTOMATIC SELECTION DOES NOT WORK.
TECHNICAL SPECIFICATIONS General Power supply: Current consumption: Maximum power output: 11~16V DC max. 10 A 52W x 4 channels (max) DVD/ VCD/ MP3/MP4/VIDEO /CD/CDR/-RW/DVD±R/±RW/PICTURE PLAYBACK Compatible formats: Dimensions (W x D x H) / weight: 178*170*50mm/2 kg Working temperature range: ESP function: -10℃ - +60℃ 10 sec. for Audio CD, 120 sec.
