80W LED Beam Moving Head USER MANUAL Please read this manual carefully and proper take care of this manual.
Dear customer, First of all thanks for purchasing a SOUNDSATION® product. Our mission is to satisfy all possible needs of musical instrument, professional audio and lighting users offering a wide range of products using the latest technologies. We hope you will be satisfied with this item and, if you want to collaborate, we are looking for a feedback from you about the operation of the product and possible improvements to introduce in the next future. Go to our website www.soundsationmusic.
ENGLISH TABLE OF CONTENTS 1. 1. INTRODUCTION.....................................................................................................6 1.1. UNPACKING..............................................................................................................................................................6 1.2. ACCESSORIES...........................................................................................................................................................6 2. OVERVIEW...
ENGLISH TWILIGHT 180 BEAM User manual IMPORTANT SAFETY SYMBOLS The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even under the normal operating conditions, which may be sufficient to constitute the risk of electric shock or death. The symbol is used in the service documentation to indicate that specific component shall be replaced only by the component specified in that documentation for safety reasons.
ENGLISH TWILIGHT 180 BEAM User manual ff Follow all instructions Water / Moisture The apparatus should be protected from moisture and rain and can not be used near water; for example near a bathtub, a kitchen sink, a swimming pool, etc. Condensation To avoid condensation to be formed inside, allow this unit to adapt to the surrounding temperatures when bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full performance or may even cause damages.
ENGLISH TWILIGHT 180 BEAM User manual To avoid electric shock, all fixtures must be connected to circuits with a suitable ground. Do not power on and power off the fixture in a short time. DMX connection When use DMX controller, please make sure that there is no interference sources (e.g. intercom, high frequency radio waves and radiation source). Cleaning Clean only with a dry cloth. Do not use any solvents such as benzene or alcohol.
ENGLISH TWILIGHT 180 BEAM User manual All products in our catalogue has been long tested with this device, so we recommend you to use Genuine SOUNDSATION Accessories and Parts. Ask your SOUNDSATION dealer or check out our website www.soundsationmusic.com for any accessories you could need to ensure best performance of the product. 2.
ENGLISH TWILIGHT 180 BEAM User manual 4. FRONT/REAR PANELS 5 Front Panel 2 UP DMX A0001 MENU Temp.:19C ENTER DOWN MIC MADE IN CHINA 1 6 3 4 1. MENU: Used to select different menu items. 2. UP: To go up in the menu and to increase values shown on the display. 3. DOWN: To go back in the menu and to lower values shown on the display. 4. ENTER: Used to confirm your choice. 5. DMX indicator LED: It light when the device receives DMX signals 6.
ENGLISH TWILIGHT 180 BEAM User manual 5. MENU OPERATING INSTRUCTION With the help of the LCD display, it’s very easy to set up and change operating mode. When TWILIGHT 180 BEAM is powered on, firstly current operating standalone mode or DMX address will be shown on LCD monitor.
ENGLISH TWILIGHT 180 BEAM User manual Special ENTER UP / DOWN Motor Reset Error Stats Motor Adjust P/T Correct Fan Mode PAN TILT COLOR GOBO1 GOBO2 FOCUS PRISM1 PRISM2 PAN TILT COLOR GOBO1 GOBO2 FOCUS PRISM1 PRISM2 PAN TILT COLOR GOBO1 GOBO2 FOCUS PRISM1 PRISM2 YES NO AUTO ON 6. OVERHEAD RIGGING • WARNING: The installation must be carried out by qualified service personal only. Improper installation can result in serious injuries and /or damage to property.
ENGLISH TWILIGHT 180 BEAM User manual • Before the first time use, it must be inspected by professional staff to make sure safety, inspection regularly every year. 7. MAINS CONNECTIONS Connect the device to the mains with the supplied power cable. Please note that power voltage and frequency are the same as the marked voltage and frequency of device when connecting power. Every device’s power should be connected separately, so that device can be controlled individually.
ENGLISH TWILIGHT 180 BEAM User manual female connectors. The shield connection is pin 1, while pin 2 is Data Negative (S-), and pin 3 is Data positive (S+). DMX use of 3-Pin XLR Connectors INPUT 3-Pin XLR Pin 1: GND Pin 2: DMX Pin 3: DMX + OUTPUT CAUTION: Wires must not come into contact with each other; otherwise the fixtures will not work at all, or will not work properly. 8.1. DMX Terminator DMX is a resilient communication protocol, however errors still occasionally occur.
ENGLISH TWILIGHT 180 BEAM User manual 9. DMX Channel Chart There are two modes to get DMX 512 signal for this fixture; one is 13CH, and the other is 17 CH. Please find the details as follow: 13-Channels Channel Function Value 1CH Pan 0-255 Pan Movement (540˚) 2CH Tilt 0-255 Tilt Movement (222˚) 3CH Pan/Tilt speed 0-255 Decreasing speed 4CH Dimmer 0-255 Dimmer 0-100% 0-19 No function 5CH 6CH 7CH 8CH 9CH 10CH Strobe Color Focus Rotating gobo Gobo1 Rot.
ENGLISH TWILIGHT 180 BEAM User manual 10CH Static gobo 80-99 Gobo4 100-119 Gobo5 120-139 Gobo6 140-159 Gobo7 160-179 Gobo8 180-199 Forwards skipped rotation from fast to slow 200-227 Forwards Continuous rotation from fast to slow 228-255 Backwards Continuous rotation from slow to fast 0-63 11CH Prism prism1 inserted , prism2 excluded 128-191 prism1 excluded,prism2,inserted 192-255 prism1 and prism2 inserted 0-63 12CH Prism rot.
ENGLISH TWILIGHT 180 BEAM User manual 10CH 11CH 12CH 13CH 14CH 15CH 16CH 17CH Focus Rotating gobo Gobo1 Rot. Gobo1 shake Static gobo Prism Prism rot.
ENGLISH TWILIGHT 180 BEAM User manual 10. TROUBLESHOOTING Phenomenon Fixture cannot start to work Fixture light normally, but no responding to the DMX controller Fixture work intermittently Dark light, brightness decreases obviously Beam is not pure (have a halo) Beam is seriously distorted Solution 1. Check if the power fuse burnout 1. Check if the DMX start address is correct 2.
ENGLISH TWILIGHT 180 BEAM User manual Beam intensity: Beam angle Focus Color wheel Rotating Gobo wheel Static gobo wheel Effect wheel Dimmer/Strobe PAN/TILT Working modes DMX Control Housing Voltage Power consumption Fixture Size (LxHxD) Fixture Weight Carton Size (LxHxD) Carton Weight 210.
ENGLISH 14. WARRANTY AND SERVICE All SOUNDSATION products feature a limited two-year warranty. This two-year warranty is specific to the date of purchase as shown on your purchase receipt.
This product is imported in EU by Questo prodotto viene importato nella UE da FRENEXPORT SPA – Via Enzo Ferrari, 10 - 62017 Porto Recanati - Italy www.soundsationmusic.
www.soundsationmusic.com Ver 2.0 - Dec.
