DMX125BT MONITOR WITH RECEIVER Quick Start Guide • For detailed operations and information, refer to the INSTRUCTION MANUAL on the following website: Model name indication position See “Removing the trim plate” (P.13) Trim plate Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new receiver.
Contents Before use.................................................................................. 2 How to read this manual.................................................................................... 2 Precautions................................................................................................................. 2 Getting Started........................................................................ 3 Clock settings..................................................................
Getting Started 1 Turn the ignition key of your car to ACC. The unit is turned on. 2 Press the <8MENU> button. 3 Touch [ ]. [Bluetooth] Displays the Bluetooth Settings screen. [Screen] [Dimmer] Select the dimmer mode. “High” (Default) / “Mid” / “Low” [Demo] Select the demonstration mode. Default is “ON”. 5 Touch [6]. Clock settings 4 Touch the corresponding key and set the value. ÑÑSynchronizing the clock time with FM RDS Activate [RDS Clock Sync]. See Radio Setup (P.5).
Basics Basics Functions of the Buttons on the Front Panel 1 2 HOME screen 1 Press the <8MENU> button. HOME screen appears. 7 3 1 2 3 5 6 4 4 5 6 1 Remote Sensor • Receives the remote control signal. 2 8MENU • Displays the HOME screen. (P.4) • Pressing for 1 second turns the power off. • When the power off, turns the power on. 3 AUD • Displays the Audio screen.* (P.10) * The Audio screen is not displayed during SETUP screen or on the list screen etc, 4 + , – (Volume) • Adjusts volume.
Radio Radio Radio Basic Operation Radio Setup 1 Press the <8MENU> button. 2 Touch [Radio]. ]. 1 Touch [ 2 Set each item as follows. ÑÑSource control screen 1 2 3 1 Displays the information of the current station: PS name, Frequency, PTY Genre, Indicator Items 2 [FM] : Switches the FM band. “FM1”, “FM2”, “FM3” [AM] : Switches the AM band. “AM1”, “AM2” [E] [F] : Tunes in a station with good reception automatically. [ ] : Presets stations automatically. (P.5) 3 Recalls the memorized station.
USB USB ÑÑFor Video playback Preparation 1 When the operation buttons are not displayed ÑÑConnecting a USB device on the screen, touch the display. 1 Remove the cap of the USB terminal. 2 Connect the USB device with the USB cable. 7 The unit reads the device and playback starts. 6 [ ÑÑTo disconnect the USB device: 1 Press the <8MENU> button. 2 Touch a source other than [USB]. 3 Detach the USB device. ÑÑUsable USB device This unit can play MPEG1/ MPEG2/ MPEG4/ H.
iPod/iPhone iPod/iPhone Preparation Playback operations ÑÑConnecting iPod/iPhone • For Lightning connector models: Use USB Audio cable for iPod/iPhone—KCA-iP103 (optional accessory). • For details about connecting iPod/iPhone, see page 15 . 1 Remove the cap of the USB terminal. 2 Connect the iPod/iPhone. The unit reads the device and playback starts. ÑÑTo disconnect the iPod/iPhone 1 Press the <8MENU> button. 2 Touch a source other than [iPod]. 3 Detach the iPod/iPhone.
External External Components Components Using external audio/video players ÑÑStarting playback 1 Connect an external component to the AV-IN input terminal. (P.14) 2 Press the <8MENU> button. 3 Touch [AV-IN]. 4 Turn on the connected component and start Rear view camera To use a rear view camera, the REVERSE lead connection is required. For connecting a rear view camera. (P.
Bluetooth Bluetooth Register your smartphone to the unit You can use your Bluetooth smartphone when paired to this unit. 1 Turn on the Bluetooth function on your Make a phone call 1 Press the <8MENU> button. 2 Touch [TEL]. 3 See the table below for each operation method. smartphone/cell-phone. 2 Search the unit (“DMX125BT”) from your smartphone/cell-phone. If a PIN code is required, enter the PIN code (“0000”). • appears when the Bluetooth smartphone is connected.
Controlling Audio Bluetooth Playing Bluetooth Audio Device You can adjust various settings such as audio balance or subwoofer level. 1 Press the <8MENU> button. 2 Touch [BT Audio]. 1 Press the button. 2 See the below for each operation method. ÑÑSource control screen 1 2 3 1 Displays the information of the current file. 2 Playing time/File number Play time bar : For confirmation of current playing position. 3 [ ] : Selects Random playback mode. ] : Selects Repeat playback mode.
Installation Installation Before Installation Before installation of this unit, please note the following precautions. #WARNINGS • If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. • Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow).
Installation ÑÑSupplied accessories for installation 1 ÑÑNon-Japanese cars x2 x1 4 3 (3 m) x1 x1 5 6 x1 7 Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. x1 8 (M5 × 6 mm) 9 Installing the unit 2 x6 (M5 × 8 mm) x6 (2 m) x1 ÑÑInstallation procedure 1) To prevent a short circuit, remove the key from the ignition and disconnect the ¤ terminal of the battery. 2) Make the proper input and output wire connections for each unit.
Installation ÑÑMicrophone unit ÑÑRemoving the unit 1) Check the installation position of the microphone (accessory 4). 2) Clean the installation surface. 3) Remove the separator of the microphone (accessory 4), and stick the microphone to the place shown below. 4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method. 5) Adjust the direction of the microphone (accessory 4) to the driver.
Installation ÑÑConnecting wires to terminals REMOTE CONT STEERING WHEEL REMOTE INPUT Light Blue/Yellow (Steering remote control wire) Bright Green/Red ST REMOTE INPUT 1 To steering remote To use the steering wheel remote control feature, you need an exclusive remote adapter (not supplied) matched to your car. ST REMOTE INPUT 2 ST REMOTE GND Connect to the vehicle’s parking brake detection switch harness.
Installation ÑÑConnecting an iPod/iPhone/Android Android smartphone[2] Micro USB to USB cable[2] M4x6 REAR OUT FRONT OUT AV IN L R 1 3 5 7 2 4 6 8 iPod/iPhone[2] Lightning connector 1 3 5 7 2 4 6 8 CAM IN VIDEO OUT VIDEO IN ANT KCA-iP103 (0.8m)[3] Accessory 5 Accessory 6 Speaker impedance: 4-8 Ω USB terminal[1] (0.8 m) 5V=1.
About this Unit About this Unit More information Note for specifications ÑÑUsable USB device ÑÑBluetooth section This unit can play MPEG1/ MPEG2/ MPEG4/ H.264/ MKV/ MP3/WMA/ AAC/ WAV/ FLAC/ OGG files stored in a USB mass storage class device. • File system: FAT16/ FAT32 Frequency : 2.402 – 2.480 GHz Output Power : +8 dBm (AVE), Power Class1 ✎✎NOTE • When the USB device is connected to this unit, it can be charged through the USB cable.
About this Unit About this Acerca de esta Unit unidad Ñ FCC WARNING 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
!B5K-0673-31_K_EnFrEs.
