NA87 Car Audio System Player INSTRUCTION MANUAL MP3 WMA USB SD AUX-IN BT 1A USB Universal Charge
Safety WARNING Stop the car before operating the unit. Important to know... To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Caution: Adjust the volume so that you can hear sounds outside the car. Driving with the volume too high may cause an accident. Condensation: When the car is air-conditioned, moisture may collect on the laser lens. This may cause disc read errors. In this case, remove the disc and wait for the moisture to evaporate.
Preparation What’s in the box How to attach/detach the faceplate Check and identify the contents of your package: Attach Detach 1 2 1 Main unit (with sleeve) Front panel Trim plate 2 Do not expose the faceplate to direct sunlight, excessive heat, or humidity. Also avoid places with too much dust or the possibility of water splashing. Keep the faceplate in its casing while detached. The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.
Installation / Connection Caution Basic Procedure 1 Remove the key from the ignition switch, then disconnect the terminal of the car battery. 2 Make proper input and output wire connections. 3 Install the unit to your car. 4 Reconnect the terminal of the car battery. 5 Reset the unit. Warning The unit can only be installed in a car with a 12 V DC power supply, negative ground.
Installing the unit 1 3 1 Bend the appropriate tabs to hold the sleeve firmly in place. Sleeve 2 Trim plate Control panel 2 Before attaching, make sure the direction of the escutcheon is correct. (Wider hooks on the bottom side.) 18 2m m 1 53 mm Dashboard 2 Screw ( not included in this packing ) 3 Sleeve 4 Trim plate Control panel Removing the unit 1 Detach the control panel. 2 Engage the catch pin on the removal tools into the holes on both sides of the escutcheon, then pull it out.
Basic Operation Rotary Volume Knob Display Window DBSS BAND EQ MENU Detaches the control panel SUB-W XBASS SRC 1 Power / Mute 2 3 4 5 6 Aux-In jack USB terminal Push open the cover When you press or hold the following button(s)... Main unit General operation Select the available sources (Radio, USB, SD, BT AUDIO or MP3-LINK ), if the power is turned on. SRC Rotate it to increase or decrease the volume. Rotatory Volume knob Select items. ■ Turn mute or restore volume. ■ Turn the unit on.
Function Settings 1 Press MENU to access into the [AUDIO MENU] mode, press and hold to enter into the [MENU] mode. 2 Press MENU repeatedly to select the item to be adjusted. 3 Turn the encoder volume knob to select a value / option. [AUDIO MENU] ... Item BASS ADJUST BASS LEVEL TREBLE ADJUST TREBLE LEVEL BALANCE FADER Selectable Setting Adjust the level -7 to +7. Adjust the level -7 to +7. Adjust the balance between the right and left speakers from 10R (full right) to 10L (full left).
Listening to the Radio DBSS BAND EQ MENU XBASS SRC SUB-W 1 ■ ■ 2 3 4 5 6 Hold for about 2 seconds to memorize the current station . Press briefly to recall memorized station. 1 Press BAND repeatedly to a band ( FM1, FM2, FM3, AM1(MW1) or AM2 (MW2)). Press and hold to activate the Auto Store function. 2 Press to search for a station. Adjust [MENU] mode settings While listening to the radio... 1 Press and hold MENU to enter into the [MENU] mode.
Listening to a USB/SD device Detaches the control panel ■ ■ Press to select a track / file. Press and hold for fast forward / backward. USB terminal DBSS BAND EQ MENU XBASS SRC Press into search mode Press to repeat one track, press again repeat a folder. SUB-W 1 2 3 4 Press to pause. Press again to resume playback. 5 6 Press to move next/previous folder. Press to start random play, press again to random a folder.
Operation of Bluetooth Hands-Free ■ ■ Press to answer / accept the call. Press and hold to transfer the call. BAND DBSS EQ MENU Press to reject / end the call. SUB-W XBASS SRC 1 2 3 4 5 6 Press to change to "BT AUDIO" mode You can make or receive phone calls with Bluetooth-enabled To redial number phones through the unit. You can also listen to music from a 1 Press on front panel to redial. Bluetooth-enabled device.
Remote Control Operation SRC AUDIO When you press or hold the following button(s)... Main unit General operation Turn mute or restore volume. Press turn the unit on or off. Press increas the volume. Press decreas the volume. ■ ■ SRC AUDIO Under Radio mode to enter into the Auto Seek mode, press and hold to enter into the Manual Seek mode. Under Media playback mode to skip track / file, press and hold to fast forward / backward.
Product Information General Power Supply: 12V DC (10.5-14.4V), negative ground Fuse: 15A Suitable Speaker Impedance: 4 -8 Aux-In level: 800mV USB devices USB Flash Memory: USB 1.1 & 2.0 Compatible Memory Card Support type of memory card: SD/SDHC Audio Section Maximum Power Output: 50W x 4 Channels Continous Power Output: 22W x 4 RMS Pre-AMP Output Voltage: 1.5V Subwoofer Output Voltage: 1.5 V Bluetooth Output power: Class 2 ISMISM Band Frequency band: 2.402-2.480GHz 2.4000GHz-2.
www.nakamichicaraudio.
