DEUTSCH NEDERLANDS NORSK ČEŠTINA Hersteller Wörlein GmbH Gewerbestrasse 12 D 90556 Cadolzburg GERMANY ENGLISH FRANCAIS ITALANIO DANSK Tel.: +49 9103/71670 Fax.: +49 9103/716712 Email. info@woerlein.com Web: www.woerlein.
ENVIRONMENTAL PROTECTION Do not dispose of this product with the normal household waste at the end of its life cycle. Return it to a collection point for the recycling of electrical and electronic devices. This is indicated by the symbol on the product, user manual or packaging. The materials are reusable according to their markings. By reusing, recycling or other forms of utilization of old devices you make an important contribution to the protection of our environment.
MCD5500 / English Instruction Manual BATTERY INSTALLATION The battery compartment is located on the back of the remote control. 1. Remove the battery compartment door by pressing in on the tab and lifting it off. 2. Insert two (2) AAA size batteries (not included) into the battery compartment following the polarity markings inside the battery compartment. 3. Replace the battery compartment door.
MCD5500 / English Instruction Manual LOCATION OF CONTROLS 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) 21) 22) 23) 24) 25) 26) 27) 28) 29) 30) 31) 32) 33) 34) Turntable cover LCD display Stop /Enter button Record button Standby LED indicator On/Standby button Earphone jack USB Socket Cassette door (1) Function button SD card slot Mem/Clock-Adjust button Skip/tuning Down button Cassette 1 control key CD tray Play/Pause /band button Preset EQ button Remote sensor Volume knob Tone c
MCD5500 / English Instruction Manual Setting the clock 1. 2. 3. 4. Set unit in standby mode. Press and hold the “ Mem/Clk-Adj ” button (12) until display will flash “24HR” press the Skip Up or Skip Down button (23/13) to select the clock format between 12 or 24Hour. Then press the “ Mem/Clk-Adj ” button (12). The first digit of “ 0:00 ” is flashing on the LCD display (2). Press Skip Up or Skip Down button (23/13) to set the correct hour. Press “ Mem/Clk-Adj ” button (12) to store the correct hour.
MCD5500 / English Instruction Manual FM-Stereo reception Press the “ Enter ” knob (3) repeatedly, the FM programs are receiving in mono and stereo mode repeatedly. In particular when stereo signals are weak, it is preferable to receive the program in Mono. Hints for best reception:- FM/DAB : the receiver work with detachable DAB/FM wire antenna, make sure the antenna is plugged into the antenna socket (30), totally unraveled and proper located for the best reception. Aux-in connection 1. 2. 3.
MCD5500 / English Instruction Manual MP3 track format requirement:- Bit rate : 32 kbps~320kbps, sampling rate : 32khz, 44.1khz and 48 kHz decodable The performance of playing MP3 Disc is various from the quality of recording disc and the method of recording. Furthermore, the searching lead-time for MP3-CD is longer than normal CD due to difference format.
MCD5500 / English Instruction Manual Playback of MP3 song via USB storage media or memory card Connecting The system is able to decode and playback all MP3 file which stored in the memory media with USB connecting port or SD/MMC memory card. 1. Set the system at standby mode first or other function except SD or USB mode. 2.
MCD5500 / English Instruction Manual C) DAB encoding 1. 2. 3. Operate tuner mode refer above listening to radio section to receive the station you would like to encode. Press the “ “ button twice (4) until the unit will display flashing with “REC USB “ icon. Encoding is now performing. After finish of recoding, press“ stop “ button (3) until the symbol “ REC USB “ disappear.
MCD5500 / English Instruction Manual Listing to tape General operation Stop / eject key press to stop all deck operation. Press again to open the cassette door. Fast forward key & Fast rewind key press to start rapid tape winding in either forward or revers direction. Press stop / fast rewind key eject keys when the cassette spools stop turning. Play key press to start playing tape. Pause key press to stop tape operation temporarily. Press again to resume play.
MCD5500 / English Instruction Manual C. Pre-set EQ function This unit provides 4 differences sound mode to enhance your listening experience. You can select the desired effect by pressing the “ Preset EQ ” button (22) repeatedly at following sequence:FLAT CLASSIC ROCK POP JAZZ Factory Reset 1. 2. 3.