Operation Manual

ManualsBrandsSoundmaster Manualsaudio & home theatreDISC4020

DISC4020 / English Manual

ENG 1

LOCATION OF CONTROLS

MAIN UNIT

1) LCD display

2) Remote sensor

3) Standby LED indicator

4) CD door

5) USB Socket

6) SD/MMC card slot

7) Snooze button

8) Alarm button

9) Stop

/St-Mono button

10) Play/Pause button

11) Volume knob

12) On/Standby button

13) Function button

14) Preset EQ button

15) Folder/Pre-Up button

16) Skip/Tuning Up

/Down button

17) Memory/Clock-Adjust button

18) Play Mode button

19) FM wire antenna

20) Aux-in jack

21) 3.5mm Headphone jack

22) DC jack

23) AC/DC adaptor

24) DC plug

Caution:

Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous

radiation exposure.

This unit should not be adjusted or repaired by anyone except qualified service personnel.

Important:

Since movement of the CD mechanism and the sensitive circuitry may cause interference to the radio tuner nearby, switch this

unit off while operating other

radio devices

Precautions for use

Installation

• Unpack all parts and remove protective material.

• Do not connect the unit to the mains before checking the main voltage and before all other connections have been made.

• Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.

Connection

1. Connect the DC plug (24) to the DC jack (22) of the main unit, then plug in the AC/DC adaptor (23) to the AC outlet. The unit

will go to standby mode and the Standby LED indicator (3) will light up.

2. Turn on the unit (12), if the LCD display (1) is on with backlighting, it means the power supply is normal. Now your system is

ready to play the music.

Summary of content (7 pages)

PAGE 1
DISC4020 / English Manual LOCATION OF CONTROLS MAIN UNIT 1) LCD display 2) Remote sensor 3) Standby LED indicator 4) CD door 5) USB Socket 6) SD/MMC card slot 7) Snooze button 8) Alarm button 9) Stop /St-Mono button button 10) Play/Pause 11) Volume knob 12) On/Standby button 13) Function button 14) Preset EQ button 15) Folder/Pre-Up button 16) Skip/Tuning Up /Down button 17) Memory/Clock-Adjust button 18) Play Mode button 19) FM wire antenna 20) Aux-in jack 21) 3.
PAGE 2
DISC4020 / English Manual Setting the clock 1. 2. 3. 4. ¾ ¾ Set unit in standby mode. Press & hold the “ Mem/Clk-Adj ” button (17), display will flash “24HR” press the Skip Up or Skip Down button (16) to select the clock format between 12 or 24Hour. Then press the “ Mem/Clk-Adj ” button (17). or Skip Down button (16) to set the The first digit of “ 0:00 ” is flashing on the LCD display (1). Press Skip Up correct hour. Press “ Mem/Clk-Adj ” button (17) to store the correct hour.
PAGE 3
DISC4020 / English Manual Playing Compact Disc z Getting start 1. 2. 3. 4. Press Function button (13) to select “ CD ” mode. Push the CD door open (4) to open the CD door. Place a CD with the printed side facing out and then close the CD. Focus search will performing and the LCD display (1) will show the total number of tracks & total playing time. Then, the unit will start to automatically. Press Volume knob (11) to the desired volume level. 5. z Play / Pause mode 1.
PAGE 4
DISC4020 / English Manual z Repeat/Random mode Press the “ Play Mode ” button (18) during playback to select repeat and random function, a single track, all the tracks repeat or folder repeat(MP3 only) and random can be played in difference mode as follow:For CD (1) repeat 1 Play mode Repeat track Repeat all Random Off mode (2) repeat all track (3) random (4) off mode Indicator on LCD display & flashing RAN -------------- For MP3 Disc (1) repeat 1 (2) repeat all tracks (5) off mode Play mode Repe
PAGE 5
DISC4020 / English Manual Playback of MP3 song via USB storage media or memory Card Connecting The system is able to decode and playback all MP3 /WMA file which stored in the memory media with USB connecting port or SD/MMC memory card. 1. 2. z 3. 4. 5. Set the system at standby mode first or other function except SD or USB mode.
PAGE 6
DISC4020 / English Manual C. Pre-set EQ function This unit provides 4 differences sound mode to enhance your listening experience. You can select the desired effect by pressing the “ Preset EQ ” button (14) repeatedly at following sequence:- FLAT CLASSIC ROCK POP JAZZ E. Display function(On remote control) For convenience usage, press “ Display/ID3 “when system is on at any mode, the LCD display (1) will show the current time. F.
PAGE 7
DISC4020 / English Manual Remote control transmitter Control functions Battery installation (battery not provided) The infra-red transmitter require 1 pcs “ CR2032 “ size battery for operation Button description On/standby Skip up /down Press to power on / standby the system / Press to select previous / next tracks at CD/USB/SD mode Tune+/- Press to step up/down of radio frequency at tuner mode -10/+10 In CD mode : skip up/down 10 tracks Folder/Pre Up-Down In Tuner mode : press to select preset