CD9180 / English manual LOCATION OF CONTROLS 1. Dir UP / ASP button 9. Battery compartment 2. EQ button 10. Open knob 3. MODE / PROG button 11. Volume knob 4. SKIP / SEARCH DN button 12. Phone jack 5. STOP button 13. DC jack 6. PLAY / PAUSE button 14. Recharge switch 7. SKIP / SEARCH UP button 15. Recharge Indicator 8.
CD9180 / English manual 1. Open Battery Compartment cover. 2. Insert 2 batteries ( UM-3, “AA”, LR6 or equivalent ) in the correct polarity as indicated. (Heavy duty batteries are recommended). 3. Close the cover properly. *In order to operate the player on batteries, the optional AC/DC adaptor must be disconnected from the DC 4.5V Jack. AC— —DC Adaptor *Before connection, make sure the AC voltage of the adaptor correspond to your local AC outlet voltage. 1. Plug the DC output of the adaptor to the DC 4.
CD9180 / English manual DISC PLAYING Sound Effects During playback you can choose between the following Sound Effects:” BBS, Pop, Jazz, Rock, and Classic”, by pressing EQ BUTTON repeatedly. To turn off the effects, press the EQ BUTTON repeatedly until the “Sound Effects” indicator disappears. Getting Start 1. Insert the headphone/earphone plug to PHONE JACK. 2. Press the OPEN KNOB, and then the door opens, put a disc into the CD compartment with label side upward. 3.
CD9180 / English manual Various Playing Modes MODE BUTTON — There are 3 kinds of function: ( FOR CD ) : A. Repeat Play During Play Mode · Press the MODE BUTTON once to play current track repeatedly. · The repeat indicator will appear in the display. During Play Mode · Press the MODE BUTTON twice to play the entire disc repeatedly. · The repeat indicator will appear in the display. NOTE – To cancel REPEAT PLAY simply press the MODE BUTTON until the repeat Indicator disappears. B.
CD9180 / English manual B. Intro Scan During Play Mode · Press the MODE BUTTON four times. · The INT indicator will appear in the display. · Press the PLAY BUTTON to play the first 10 seconds of each track on the disc. NOTE – To cancel INTRO SCAN, simply press the MODE BUTTON until the INT indicator disappears. C. Random Play During Play Mode · Press the MODE BUTTON five times. · The SHUF indicator will appear in the display.
CD9180 / English manual 7. Press BUTTON to start the program play. 8. To stop the program play, press the STOP BUTTON. 9. For program play in step “ 8 ”, press the PROG BUTTON & BUTTON. 10. To check the program memory, in program play mode, press the or BUTTONS. 11. To erase the program memory, open the door or turn off the power. ※ If you do not need to select directory but only select files, the above step 3 can be skipped.